Results 1 to 7 of 7

Thread: Maxyzmodules 225mW RED module, singles and duals

  1. #1
    Join Date
    Feb 2005
    Location
    Florida
    Posts
    802

    Default Maxyzmodules 225mW RED module, singles and duals

    Decided a new thread was in order, Last one got trashed

    For Sale:
    As seen on ebay and on this site !!!
    Maxyzmodules RED 660nm 225mW laser module

    As of : August 3 2007 (updated EUR)

    for Photolexicon members ..
    269.95USD or 197.80EUR each --
    Shipping is 15USD for USA and Canada
    25USd or 18.39EUR for International orders
    284.95USD Total for USA or 294.95USD (216.88EUR) total for International

    That's 539.90USD for a Pair ...(396.99EUR)
    Same price shipping...Limited time offer ...
    They come Analog modulation...Altho , You can use the analog units in TTL configuration.
    These will include the new driver board with full blanking to well over 30khz. (useful to at least 100khz)

    Also included FREE is a 9volt wallwart power supply (while supply lasts)
    they operate from 120/220ac 50/60hz

    If you need a mounting plate, We offer them at 25USD 18.39EUR each
    These are for mounting of a single unit.

    If you need a dual mounting plate for combining a pair 45USD 33.09EUR each.
    ..set-up and predrilled for mounting of a MM-1 or equivalent mirror mount and a MM-1 /BS or equivalent like the one pictured in below.

    still have a few for you guys that want to roll your own:
    Laser_line PBS cube 165.00USD or 121.33EUR
    Laser-Line PBS cube mounted to MM1 or KMS is 235.00USD or 172.80EUR
    Laser-Line mirror mounted to MM1 or KMS is 75.00USD or 55.15EUR
    Plus shipping.

    Grab a couple and find a Beamsplitter or Pol Cube and combine them
    for more power... I get over 430mW out of my setup real fast.
    If you buy 2 , I will set one of them up Opposite polarity for easier combining!!!


    If you buy the whole set-up its 805USD plus 20USD in USA/Canada , 825USD total
    or 830USD 591.92EUR plus 30USD 22.06EUR international shipping , 610.30EUR total

    Each unit is handcrafted. therefore.. great care is put in each unit before they leave..
    The power is doublechecked with a Melles Griot and Scientech broadband power meters.
    All parts are NEW .. except the heat sink which is black anodised
    However , We have just started to paint them with a special FLAT BLACK paint.
    The beam diameter is less than 2.5mm (always) mostly around 2.2mm
    and divergence less than 1.0mR. Typically .8mR.

    Only a few complete set-ups left till we get more mounts..so hurry !!!
    Oh and dont forget, if paying by PAYPAL please add the 4percent they charge for their cut
    Thats about 33.00USD or 24.27EUR for the duals.

    Some of these pictures are old.. I will get some new ones up soon.
    The combined plate has been redesigned slightly so no holes are covered and are spaced correctly.
    Still using 3/8" holes spaced 5" each way on the 6" by 6" plates.

    The diodes are NOT the small 100mW DVD diodes...!!!
    And we thank everyone who has bought these...enjoy

    Please PM me for more info
    Thanks
    Attached Thumbnails Attached Thumbnails 200red front.jpg  

    200red fire.jpg  

    carey 450-1.jpg  

    Last edited by marconi; 08-03-2007 at 14:56.
    "My signature has been taken, so Insert another here"
    http://repairfaq.ece.drexel.edu/sam/laserfaq.htm
    *^_^* aka PhiloUHF

  2. #2
    Join Date
    Feb 2005
    Location
    Florida
    Posts
    802

    Default

    Updated pricing july 7 2007
    "My signature has been taken, so Insert another here"
    http://repairfaq.ece.drexel.edu/sam/laserfaq.htm
    *^_^* aka PhiloUHF

  3. #3
    Join Date
    Jan 2007
    Location
    Florida
    Posts
    4,382

    Default

    Your Modules are Awesome.Dude!
    They burn holes in wood!!

  4. #4
    Join Date
    May 2007
    Location
    Milwaukee WI
    Posts
    1,355

    Default

    yeah I agree! I'm loving my dual setup, I'm just waiting until the quadmod becomes available......

  5. #5
    Join Date
    Mar 2007
    Location
    Rotorua New Zealand
    Posts
    528

    Default Ray






    My dual has just arrived down here in New Zealand..

    Haven't turned it on yet, just the hardware alone is a thing of beauty,

    Ray

  6. #6
    Join Date
    May 2007
    Location
    Milwaukee WI
    Posts
    1,355

    Default

    You'll enjoy it Ray!


  7. #7
    Join Date
    Oct 2006
    Location
    Austria
    Posts
    60

    Default

    Yeah. I also received my Duals.... They are great!!! Thanks for the nice lasers and the good support!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •