Results 1 to 5 of 5

Thread: anyway to know divergence after collimator?

  1. #1
    Join Date
    May 2016
    Posts
    104

    Default anyway to know divergence after collimator?

    The specs of the laser diodes mention the x and y divergence, but is there any way to know what the divergence will be after the beam passes through the collimator lens?

    And does a prism or cylindrical pair just decrease the diameter of a beam profile of multimode diode in one axis, or do they also change the divergence?

  2. #2
    Join Date
    Oct 2010
    Location
    Athens, Greece
    Posts
    1,930

    Default

    this might prove useful http://www.pseudonomen.com/lasers/calculators/

    measure twice, one close to the laser and one as far as possible and feed the two beam size and distance into the calculator


    prisms and cyl pairs affect only one axis, the so called "slow axis". the "fast axis" is taken care of by the colimator
    the general idea is to magnify the beam in one dimension thus reducing divergence in that dimension, or reduce the beam size thus increasing divergence

    check out all tabs of this link, technical information is rather useful
    http://www.edmundoptics.com/optics/p...sm-pairs/2429/
    "its called character briggs..."

  3. #3
    Join Date
    May 2016
    Posts
    104

    Default

    Yes, very useful info, thanks.
    Although the divergence of some diodes after collimation is something I'd like to know before getting a diode, if it is too poor I wouldn't want to waste money.

    The diodes I'm talking about are sold by DTR and mainly for laser pointers.
    The ones I'm interested in are

    reds: Mitsu 500mW or Oclaro 700MW. I know people use these in laser projectors, no problem with these

    greens: NDG7475 or NUGM01T

    blues: NDB7875, NUBM44 or NUBM07E

  4. #4
    Join Date
    Oct 2010
    Location
    Athens, Greece
    Posts
    1,930

    Default

    .
    all of these diodes are covered in here
    .
    use search
    "its called character briggs..."

  5. #5
    Join Date
    May 2016
    Posts
    104

    Default

    Quote Originally Posted by LaNeK779 View Post
    .
    all of these diodes are covered in here
    .
    use search
    Their divergence after Collimator? I don't think they are covered, couldn't find.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •