Hi. First of all I want to introduce myself. My name is Fausto a.k.a. Matapixels. I am a filmmaker and vj in Argentina and finally after many years I could afford my laser and my controller.
Some days ago I found this forum and I īd like to congratulate you on the quantity of quality information that you have.
I make this small question, since for days I am investigating and cannot get to understand.
I have a controller phoenix live and a laser of 2w full colour.
In a few weeks I will take part in a mapping with my laser. Recently I found out that the surface in which I am going to draw is bigger than I had thought. So I am going to rent 2 more lasers of 2 w with its cables to make a big rectangle with the 3 of them.
My question is the following:
Soft Phoenix has the chance to select to which chase or laser I want to assign a drawing. I mean, when I select the drawing of the dog that will go out through the laser 1, when I select a cat, it will go out through the laser 2 and when I select a ball, it will go out through the laser 3. I need to project 3 independent drawings, one with each laser. To do this, Do I have to make an update to phoenix pro or to phoenix pro plus???
I understand that if I have the activated and hidden option if I connect the lasers I should work. But since I don't have the 3 lasers till one day after the show I cannot try.
Thanks a lot!!
pd: a little urban intervention
http://www.youtube.com/watch?v=K04RPoKLAkc