Hi again,
I have reset my PR scanners I got from Dave, not that they needed any adjustment in the first place, just thought I could improve on it. (to my own demise)
Well after 6 hours of adjustment I finally got them close to what they use to be. No here is the problematic part. I use Phoenix show controller to control my projector, it has a check hardware feature that can display the ILDA test patern so you can see if all hardware is running correctly. I used this check hardware to set the scan amps to propperly display the test patern.
So being releaved that I finally got it right, I ran a test show with Phoenix, thought I might add the ILDA test patern in the show aswell, and guess what, the ILDA test patern comes out horrible !!!
How the hell is that possible, using hardware check the ILDA patern looks correct, but displaying it in Phoenix show controller it comes out horrible, corners rounded, inner circle overdriven???
Really starting to hate Phoenix show controller...
Anybody has some idea's..
Werner