DT-40 Mirrors (preferably from US)

[absolom7691]

Hey guys. I had an "oh shit" moment and busted a mirror on my DT-40s. I figured I might as well get a new set for both galvos. Is there anyone, state-side, that has a set of (4mm beam) mirrors? If not, I may see if Dave has some available. I was just hoping to avoid int'l shipping costs.

[norty303]

I've got quite a few sets of DT30 galvos laying around if that's any use to you

[absolom7691]

I'm not sure if i'd be able to harvest the mirrors off them or just use the galvos as is. Is there any difference between the DT30 galvos vs the 40s or is all the different in the amps? If they are basically the same, I might find out how much you want for two of them. I'd have to retune, but I would imagine it would be slight.

[norty303]

The DT amp is the common part (as mine are marked DT40 and used for my 506's), so the galvos must be different.
A little application of heat to the spindle should have the mirror pop right off and if you're careful the old glue should make a guide for how they go back onto the new spindle (assuming they're the same.

See how you go with finding the mirrors on their own, I've got a 3 or 4 sets here if you need them.

[dave]

I have a heap of DT mirrors here if you need some