BUYING or trade XY Mounts for CT6230 scanners 30 degree offset

[laserist]

My desktop mill would take forever to make two of these - Anybody got a couple of these?

Thanks, Brian

[dsli_jon]

Hey Chief -

6230s, for sure, huh? Those are honkers.. I could help u with a pair of -20 mounts, ie:

..but.. IIRC, there's a good 10mm difference in barrel-size, 'tween the 20s and 30s, so.. Don't think a 'bore out' would work..

..Lemme know, shoot me an email? We should 'ketchup' anyway...

cheers..
j

PS - Also still have these: http://www.photonlexicon.com/forums/...719#post259719 ..and Yeah, I'd let go of the whole set (galvos/amps) / help you with 'proper WL mirrs', not too difficult to cut, at that size, and I still have some 'bulk' 100W dielectric.. Fwiw..

[laserist]

Hey Jon,
I may take you up on the mirror stock, but I've got two 6230 scan sets with mounts and just lucked into 2 more 8330 scan sets without mounts. Obviously my goal is a Laserium style quad with all the bells and whistles. That is after I finish my lumia projector - I've got 300+ of its make parts ready for anodizing, but the last couple odds and ends take forever to machine on my toy mill... I'll try and call tomorrow. B