I was wondering if the M462 2 watt laser diode from DTR's site has the same pin out as other diodes, like the PLTB450B?
Don't want to hook it up backwards but I can't find a pdf on this diode
Thanks
Senior Member
M462 laser diode pin out
I was wondering if the M462 2 watt laser diode from DTR's site has the same pin out as other diodes, like the PLTB450B?
Don't want to hook it up backwards but I can't find a pdf on this diode
Thanks
Polk SDA SRS, Parasound HCA 3500, Luxman M117, Onkyo 504, 7.62X39, sometimes a ball on a string is the greatest of toys for us nonhuman types. oh and some lasers, lots of lasers
Senior Member
... I'm testing the polarity with a lab-PS, set to 5V and lowest possible Amperage (5mA), then rise the current regulator to some ten Milliamps and look, if its starts to emit
Viktor
Senior Member
Why not ask Jordan?
Originally Posted by Draco
Senior Member
I have yet to get a reply from e-mail yet
Polk SDA SRS, Parasound HCA 3500, Luxman M117, Onkyo 504, 7.62X39, sometimes a ball on a string is the greatest of toys for us nonhuman types. oh and some lasers, lots of lasers
Senior Member
The pin out is the same as the other diodes , thanks guys for the advice
Polk SDA SRS, Parasound HCA 3500, Luxman M117, Onkyo 504, 7.62X39, sometimes a ball on a string is the greatest of toys for us nonhuman types. oh and some lasers, lots of lasers
Senior Member
Yes, correct!
I've found this..Image from pins (rear diode):
Senior Member
Yep the above pinout is correct. The only diodes I carry currently that don't have that point out are the 250mW Ocalro 638nm diode and the Osram PLT5 510.
Posting Permissions
Reply With Quote