Results 1 to 6 of 6

Thread: Surgilase CL100 manuals / documentation

  1. #1
    Join Date
    Mar 2015
    Location
    Cambridgeshire, England
    Posts
    442

    Default Surgilase CL100 manuals / documentation

    I have the innards of a Surgilase CL100 YAG laser but don't have any documentation for it; I'm after a service manual or schematics for it, in particular with regard to the control connections to the arc lamp PSU. Can anyone help with this?

  2. #2
    Join Date
    Jan 2013
    Posts
    3

    Default

    I have among other lasers the same.
    An email to tdk lambda technical support. (electronic measerements inc is acquired by tdk lambda), for information about the power supply did the trick.
    In 5 minutes they pointed me to this link :

    https://us.tdk-lambda.com/hp/pdfs/Pr...%20REV%20D.PDF

    Cheers to jeff from technical support of tdk lambda.

  3. #3
    Join Date
    Mar 2015
    Location
    Cambridgeshire, England
    Posts
    442

    Default

    Thanks for the link, unfortunately my psu is a box rather than a rack mount unit and the pinnings don't appear to be the same based on the limited reverse engineering I've managed to do.

  4. #4
    mixedgas's Avatar
    mixedgas is online now Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    9,191

    Default

    There is ESKI in a rack and a similar thing ALE/ LAMBDA EMI repacked in a gold anodized cube with different connections, called an ESKI by some who have the cube in Laserscopes.
    Is yours an Alodined cube?

    Note a lot of the "cheat sheet" run-up boxes for these with published schematics have serious errors. I have one that doesn't Blow Up the psu internals.

    I have two of the cubes. I then have three rack mount ESKI.

    See if this is it?

    Attached..

    This thread is useless without pics.

    Steve
    Attached Files Attached Files
    Last edited by mixedgas; 11-01-2019 at 09:23.
    Qui habet Christos, habet Vitam!
    I should have rented the space under my name for advertising.
    When I still could have...

  5. #5
    Join Date
    Mar 2015
    Location
    Cambridgeshire, England
    Posts
    442

    Default

    Thanks Steve, mine is a chromated steel cube, but it's not the same as the EMI unit; it's marked up as a CWT 380 and is rated as 3.8kW.

  6. #6
    mixedgas's Avatar
    mixedgas is online now Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    9,191

    Default

    If it were US made it pretty much came down to being made by Lambda EMI , Lumina Power, or Analog Modules, if not factory made..
    Got pics?

    Steve
    Last edited by mixedgas; 11-06-2019 at 09:36.
    Qui habet Christos, habet Vitam!
    I should have rented the space under my name for advertising.
    When I still could have...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •