I have the innards of a Surgilase CL100 YAG laser but don't have any documentation for it; I'm after a service manual or schematics for it, in particular with regard to the control connections to the arc lamp PSU. Can anyone help with this?
I have the innards of a Surgilase CL100 YAG laser but don't have any documentation for it; I'm after a service manual or schematics for it, in particular with regard to the control connections to the arc lamp PSU. Can anyone help with this?
I have among other lasers the same.
An email to tdk lambda technical support. (electronic measerements inc is acquired by tdk lambda), for information about the power supply did the trick.
In 5 minutes they pointed me to this link :
https://us.tdk-lambda.com/hp/pdfs/Pr...%20REV%20D.PDF
Cheers to jeff from technical support of tdk lambda.
Thanks for the link, unfortunately my psu is a box rather than a rack mount unit and the pinnings don't appear to be the same based on the limited reverse engineering I've managed to do.
There is ESKI in a rack and a similar thing ALE/ LAMBDA EMI repacked in a gold anodized cube with different connections, called an ESKI by some who have the cube in Laserscopes.
Is yours an Alodined cube?
Note a lot of the "cheat sheet" run-up boxes for these with published schematics have serious errors. I have one that doesn't Blow Up the psu internals.
I have two of the cubes. I then have three rack mount ESKI.
See if this is it?
Attached..
This thread is useless without pics.
Steve
Last edited by mixedgas; 11-01-2019 at 08:23.
Qui habet Christos, habet Vitam!
I should have rented the space under my name for advertising.
When I still could have...
Thanks Steve, mine is a chromated steel cube, but it's not the same as the EMI unit; it's marked up as a CWT 380 and is rated as 3.8kW.
If it were US made it pretty much came down to being made by Lambda EMI , Lumina Power, or Analog Modules, if not factory made..
Got pics?
Steve
Last edited by mixedgas; 11-06-2019 at 08:36.
Qui habet Christos, habet Vitam!
I should have rented the space under my name for advertising.
When I still could have...
Finally I retrieved the PSU from its hiding spot and got some pics.