... did some "surface-cleaning" tests:
#0 -- my magnetic iron "laser-table" - https://vimeo.com/217803061
#1 -- black coated and rusty iron part - https://vimeo.com/217803741
#2 -- chrome plated scissors - https://vimeo.com/217805970
#3 -- plastic cap - https://vimeo.com/217806477
#4 -- cast aluminium part - https://vimeo.com/217806862
#5 -- tools - https://vimeo.com/217807208
Viktor
... I've tested PCB-engraving with my marking laser too ...
- engraving:
- first pass - removed the lacquer and some of the copper (so it would be perfect for etching too!):
- after 3 passes most of the copper is removed:
- after 5 passes all the copper and bond (and a thin sheet of ceramic) is stripped:
... and a video showing the first pass and the results - https://vimeo.com/230447348
Viktor
... yesterday I've received a 60Watt-fiber-laser (bigger version of my 20Watt type) for testing and temporary replaced the 20W head.
The first action was a "parameters grid" table - here a video marking it on an aluminium sheet:
https://vimeo.com/231082792
The result:
And here the same, slightly bigger, on an iron sheet:
This types won't mark "real colours" for their fixed pulse-width with 200ns duration ... for creating colours I'll need the "s+" types of this lasers, which can vary the pulse-width down to some nanoseconds ...
Viktor
Looks great, Viktor!
-David
"Help, help, I'm being repressed!"
... while waiting and out of curiosity I've opened one of the "exploded" 25Watt-pumping-diodes of a broken fiber-laser.
The 3 diodes are OK, only the 105µm output fiber is totally burnt (dark residues top left).
Here the opened module with sketched beam paths -- the diodes are set to different heights, so their (to a horizontal line) collimated beams will form a square on the focussing lens:
- and here an older image, showing an old 5Watt-diode (same housing size as the 25W-diode) and a more modern 9Watt-diode (much smaller!):
Viktor
More impressive etches and cuts, Viktor. How long are the tags and such taking to cut/etch? Is the cost/effort a viable manufacturing method if scaled up (as compared with molds or stamping) or is it just for fun?
So do you plan on repairing the fiber or is it cheaper to replace the unit?
Keep up the great work!
-David
"Help, help, I'm being repressed!"