300mW @650nm for $250

[QUAZAR]

Found these guys during a search Lanling Tech.
They have a 300mW red diode system for $250. ANybody come across these?






Another $250 will give you 200mW of 532nm to go with it.

[sbk]

I discovered them on eBay sometime ago, here is the thread : http://www.photonlexicon.com/forums/...ead.php?t=2115

Same look than the CNI red lasers. Seems to be very good for the price!

[buffo]

I agree, the price looks great. And it's a CNI head... Hmmm. I kinda doubt that the diode would be multimode,. given CNI's reputation. But the price is almost too good to be true...

If the beam quality really is good, you could mix two of those and get 600 mw of red for around $500. (Plus optics of course.)

So who's going to be the guinnea pig?

Adam

[dave]

I agree, the price looks great. And it's a CNI head... Hmmm. I kinda doubt that the diode would be multimode,. given CNI's reputation. But the price is almost too good to be true...

If the beam quality really is good, you could mix two of those and get 600 mw of red for around $500. (Plus optics of course.)

So who's going to be the guinnea pig?

Adam

They are multimode

6mm@3mrad

[Dr Laser]

Upper picture is CNI TTL
For about 70-80$ they will swap Analog 10.

Lower is what Axiz sells or used to sell....TTL
I have blue of same company..still works

[Dr Laser]

Huafa Building, Xili Town, Nanshan Disctrict, Shenzhen, China

Thats where most of electronics/laser/optics people are.
I have a UHF radio from this building... I have a laser from this building.
I'm pretty sure if I dig deep enough I'll find some more stuff from this building.

[dave]

We sell the analogue version here, see the beam!

http://cgi.ebay.com.au/ws/eBayISAPI....9744&rd=1&rd=1

[buffo]

They are multimode - 6mm @ 3mrad
We sell the analogue version here, see the beam!
http://cgi.ebay.com.au/ws/eBayISAPI....9744&rd=1&rd=1

Oh Snap!

Thanks for the heads up Dave! Yeah, that's a big honkin' beam. And 3 mrad? Yuck. No thanks.

Sigh. I thought the price was too good to be true. Still, thanks for pointing it out!

Adam

[Dr Laser]

Most of lasers as powerful as 400mw+ @635nm and 660nm have about 5mm beam!. Thats standard for non DPSS!

[sbk]

Not for the Maxyz modules, mine's doing >480mW with exceptionnals beam specs
But ok, there's 2 diodes combined together