hello all I recently picked up a set of 678xx drivers and 6850p glavos... just want to confirm pinouts before powering...
for applying power to J1 im using 24v, i assume +24v to pin ______
-24v to pin ______
and use jumper on pin 1/2 on J3 connector of not using notch filter.. that i do have,just not using yet.
Just Confused by all the 10pin inputs , which is supply and which is signal. plz help thanks in advance
all the info i found is here,, https://rtime.felk.cvut.cz/~sojka/la...rorpossyst.pdf