**WANTED** He/Ne PSU

[QUAZAR]

Does anyone have a He/Ne power supply for sale?
Would prefer 230V operation, but a 12V unit is acceptable.
Suitable for tubes upto 20mW

Thanks.

[Laser Ben]

What voltage output do you need?

[QUAZAR]

I'm guessing 2400 - 2600VDC, with a 10KV strike. Must have female Alden connector fitted.

[steve-o]

MWK has some for sale but i dont know if they go that high >> scroll to the bottom

[QUAZAR]

Quote from web site: "It will operate 50% of the HeNe's up to 17mW"

Doesnt sound too good for my 20mW tube. Plus $110 seems a bit steep

[marconi]

Thatsa hard size to find right now..
Since Sunnking flooded ebay with those 1145p tubes
everyones after a supply..

Good luck, hope you find a cheap solution...I ended up building mine.

[Laser Ben]

I've got a SP-249 I could sell you, but it won't be cheap.

[werner1619]

Hi,
I have old uni phase power supplies, don't know much about them but it is made by Uniphase and it can switch between 115 and 230 V, uses about 13Amps and the head lases about 50- 60mW

PM if this might be what you are looking for

Werner

[QUAZAR]

Hi Werner, do you have a photo of this? The fact it pulls 13A seems a bit high for a He/Ne. Thanks.

[buffo]

sounds like an argon PSU, not a HENE...

Adam