Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: **WANTED** He/Ne PSU

  1. #1
    Join Date
    Apr 2005
    Location
    SOUTHAMPTON U.K.
    Posts
    1,357

    Default **WANTED** He/Ne PSU

    Does anyone have a He/Ne power supply for sale?
    Would prefer 230V operation, but a 12V unit is acceptable.
    Suitable for tubes upto 20mW

    Thanks.

  2. #2
    Join Date
    Jan 2007
    Location
    Cupertino, California
    Posts
    2,130

    Default

    What voltage output do you need?
    CLICKY!!!

    Admin: In the immortal words of Captain Planet: YOU HAVE THE POWER
    Admin: (To quit being a bitch)

  3. #3
    Join Date
    Apr 2005
    Location
    SOUTHAMPTON U.K.
    Posts
    1,357

    Default

    I'm guessing 2400 - 2600VDC, with a 10KV strike. Must have female Alden connector fitted.

  4. #4
    Join Date
    Jan 2007
    Location
    Florida
    Posts
    4,382

    Default

    MWK has some for sale but i dont know if they go that high >> scroll to the bottom

  5. #5
    Join Date
    Apr 2005
    Location
    SOUTHAMPTON U.K.
    Posts
    1,357

    Default

    Quote from web site: "It will operate 50% of the HeNe's up to 17mW"

    Doesnt sound too good for my 20mW tube. Plus $110 seems a bit steep




  6. #6
    Join Date
    Feb 2005
    Location
    Florida
    Posts
    802

    Default

    Thatsa hard size to find right now..
    Since Sunnking flooded ebay with those 1145p tubes
    everyones after a supply..

    Good luck, hope you find a cheap solution...I ended up building mine.
    "My signature has been taken, so Insert another here"
    http://repairfaq.ece.drexel.edu/sam/laserfaq.htm
    *^_^* aka PhiloUHF

  7. #7
    Join Date
    Jan 2007
    Location
    Cupertino, California
    Posts
    2,130

    Default

    I've got a SP-249 I could sell you, but it won't be cheap.
    CLICKY!!!

    Admin: In the immortal words of Captain Planet: YOU HAVE THE POWER
    Admin: (To quit being a bitch)

  8. #8
    Join Date
    Jan 2007
    Posts
    163

    Default

    Hi,
    I have old uni phase power supplies, don't know much about them but it is made by Uniphase and it can switch between 115 and 230 V, uses about 13Amps and the head lases about 50- 60mW

    PM if this might be what you are looking for

    Werner

  9. #9
    Join Date
    Apr 2005
    Location
    SOUTHAMPTON U.K.
    Posts
    1,357

    Default

    Hi Werner, do you have a photo of this? The fact it pulls 13A seems a bit high for a He/Ne. Thanks.

  10. #10
    Join Date
    Jan 2006
    Location
    Charleston, SC
    Posts
    2,147,489,446

    Default

    sounds like an argon PSU, not a HENE...

    Adam

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •