Results 1 to 6 of 6

Thread: Wonsung 20Kpps laser galvo sets scanner

  1. #1
    Join Date
    Dec 2015
    Location
    Kettering/UK
    Posts
    16

    Default Wonsung 20Kpps laser galvo sets scanner

    I have a few of these kits and want to control using dmx does anybody know the polarity of the DMX socket on the show card, cant find any info card is 13926506518 , which takes me to a chinese site where there are pictures of said main board , any info or manual would be very helpful Thanks Alan

  2. #2
    Join Date
    Aug 2017
    Posts
    18

    Default

    Hi Al,

    I have the documentation (such as it is**) for this board. It is about 10 MB, packed into 3 ZIP files.
    ** poorly translated, poorly organized, doesn't match the hardware perfectly, but will get you where you need to be with a little intuition
    If you still need it, PM me an email address to send it to, and I'd be happy to share it with you.

    Andy

  3. #3
    Join Date
    Dec 2015
    Location
    Kettering/UK
    Posts
    16

    Default

    HI Andy , thanks for the offer that would be great, alancourse10@gmail.com. I found by guesswork that the DMX pins are from the edge of the board Neg + then - the dmx works quite well for what i want and secondly blackout from the desk shuts off laser , very handy.

  4. #4
    Join Date
    Aug 2017
    Posts
    18

    Default

    Al,
    I just sent you 3 emails, each with a ZIP attachment.
    Let me know if you don't see them in your inbox.
    Good luck!
    Andy

  5. #5
    Join Date
    Mar 2018
    Posts
    1

    Default

    Hi,

    I'm also looking for documentation on these. Is there any chance you could post a link?

  6. #6
    Join Date
    Dec 2015
    Location
    Kettering/UK
    Posts
    16

    Default

    Hi . you are after some info of the wonsung laser kit . if you email me at alancourse10@gmail.com with request ill send you what ive got. Alan

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •