Results 1 to 9 of 9

Thread: playing ILDA shows from sd card

  1. #1
    Join Date
    Dec 2015
    Location
    Kettering/UK
    Posts
    17

    Default playing ILDA shows from sd card

    Hi all, I have just purchased a DMX show card from Goldenstar lasers and am very impressed with how it works. Question is how do i add my own ILDA files and play them from the included sd card. I have tried to find out what software is used to program the sd card but no luck so far. Any ideas.

  2. #2
    Join Date
    Dec 2009
    Location
    Laurel, MD
    Posts
    356

    Default

    Can you post a photo of the system? That will tell us what kind of system it is and through that, how to load it. The most common form of SD card system out there is one where you create a basic script file (usually with a .prg extension) that tells the system what files to play and at what scan rate. To be frank, these systems are often problematic and shaky.

    The three other common systems out there that use user accessible SD cards are FB4 by Pangolin, EtherDream by J4CBO and the RayComposer DACs by Robin Adams of RayComposer. If you have any of those systems, great news! They're all excellent and well supported.

    If your system uses .ILD files and a .prg script file, LSX and Ray Composer are great pieces of software for creating the .ild source files. if it's FB4, just use Quickshow.

  3. #3
    Join Date
    Dec 2015
    Location
    Kettering/UK
    Posts
    17

    Default

    Thanks for the info.The main board is a china special and looking at the contents of the sd card works on ILDA and script . to be honest i Have a fiest.net system which works fine over ilda so will probably stick with that. I was just toying with the idea of two or three projectors driven from the sd card projector using ILDA daisy chain. If i have any success will post results. Al

  4. #4
    Join Date
    Dec 2015
    Location
    Kettering/UK
    Posts
    17

    Default

    Further investigation has shown that file on sd card is called PESLASER and is modified with a script. I can load ILDA files to the card but cant figure out What to change to play my ILDA file here is an example from notepad.

    1,(ddrfiles/HEPING12.ddr,TI=5, SI=180, CO=150,)
    2,(ddrfiles/HEPING12.ddr,TI=5, SI=150, CO=250,)
    3,(ddrfiles/HEPING12.ddr,TI=5, SI=223, CO=110,)
    4,(ildfiles/Aurora9.ild, TI=5, )
    5,(ildfiles/Aurora18.ild,TI=5, )
    6,(ildfiles/Aurora19.ild,TI=5, )
    7,(ildfiles/Aurora24.ild,TI=5, )
    8,(ildfiles/Aurora25.ild,TI=5,)
    9,(ildfiles/Aurora26.ild,TI=5,)
    10,(ildfiles/Aurora28.ild,TI=5,)
    11,(ildfiles/Aurora29.ild,TI=5,)
    12,(ildfiles/Aurora30.ild,TI=5,)
    13,(ddrfiles/HEPING12.ddr,TI=5, RO=215, HR=220, SI=250, CO=110, )
    14,(ddrfiles/HEPING12.ddr,TI=5, HR=220, SI=250, CO=110, )
    15,(ddrfiles/HEPING12.ddr,TI=5, VR=220, SI=250, CO=110, )
    16,(ddrfiles/HEPING12.ddr,TI=5, VR=220, HB=150, CO=80, )
    17,(ddrfiles/HEPING12.ddr,TI=5, HR=210, VB=150, CO=80, )
    18,(ddrfiles/HEPING12.ddr,TI=5, RO=215, HR=220, SI=250, CO=110, )
    19,(ddrfiles/HEPING12.ddr,TI=5, DR=220, CO=80, )
    20,(ddrfiles/HEPING12.ddr,TI=5, RO=220, VR=240, BE=30, CO=90, )

    Anybody know of software programme that would handle this script and make it a bit more english.

  5. #5
    Join Date
    May 2016
    Posts
    12

    Default

    Hello.

    I have just bought 2 RayC. Net versions. I want to play files from the SD card controlled from Artnet/Sacn.
    But i have no information about the parameters.
    This is not specified in the manual.

    Have someone done this. Please help..

    /Fredrik

  6. #6
    Join Date
    May 2015
    Location
    italy
    Posts
    12

    Default

    I found this old note

    file path \ running time (TI) \ effects

    RO(Rotation Z)
    HR(Rotation x)
    VR(Rotation Y)
    HB( Position X)
    VB(Position Y)
    SI(Scale)
    DR(Visible point)
    BE(Scanner rate)
    CO(Color)

  7. #7
    Join Date
    May 2016
    Posts
    12

    Default

    Quote Originally Posted by haze View Post
    I found this old note

    file path \ running time (TI) \ effects

    RO(Rotation Z)
    HR(Rotation x)
    VR(Rotation Y)
    HB( Position X)
    VB(Position Y)
    SI(Scale)
    DR(Visible point)
    BE(Scanner rate)
    CO(Color)

    Thanks for the info.

    I did not understand how to use the file path.
    But I guess it means channel 1
    The rest of the list should be counted from channel 2 and so on.

    I also wonder if this personality is “displayed” if I use RDM.
    In the manual it says that RDM can be used if you connect a end breakout.
    But this DAC is artnet and Sacn compatibly
    So in theory I should reach RDM via artnet I guess.

    Someone who have experienced this?
    Thanks in advance
    /Fredrik.

  8. #8
    Join Date
    May 2015
    Location
    italy
    Posts
    12

    Default

    the numbers are progressive for each line
    The filepath is the path of .ild and .ddr files on the SD card

  9. #9
    Join Date
    May 2015
    Location
    italy
    Posts
    12

    Default

    if it can still be useful these days I have found two manuals that explain how to do it

    http://lasers.fonarevka.ru/attachmen...0&d=1458667785
    http://www.gagalight.com/u_file/1704...ecc52a0460.pdf

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •