Results 1 to 3 of 3

Thread: Minuit Une and laser safety

  1. #1
    Join Date
    Nov 2005
    Location
    Melbourne, Australia
    Posts
    3,702

    Default Minuit Une and laser safety

    I'm interested to get some thoughts about these things and laser safety.

    See here: https://minuitune.com/products/ivl-carres/

    An interesting product, involving a centralized spinning, rotating mirror, and 4 blade mirrors to steer the scanned output..

    What is even more interesting is the claims on this page regarding laser safety.

    https://minuitune.com/safety/

    From what i can make out in videos, the beam is low divergent, so i would have thought the peak power is going to be the limiting factor ( these are a 10w fixture)
    KVANT Australian projector sales
    https://www.facebook.com/kvantaus/

    Lasershowparts- Laser Parts at great prices
    https://www.facebook.com/lasershowparts/

  2. #2
    Join Date
    Jul 2010
    Location
    Netherlands
    Posts
    3,314

    Default

    It's very safe.. the divergence of them is quite large and so is the starting beam. I had seen them on prolight and sound.

    However: They cost a lot for what they can do and imho you are better off getting a laser projector over a fixture like this. I think they are too gimicky.

  3. #3
    Join Date
    Nov 2008
    Location
    Cleveland Ohio
    Posts
    2,599

    Default

    It's easy to calculate what safe means. Hit up www.laserpointersafety.com and use the calculator. You need distance, power, divergence, duty cycle if pulsed, and of course wavelength but it's all visible.
    Punch it in and it tells you the nominal safety distance, ED50 AEL etc.....

    See patrick I did listen......

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •