Hi everyone. Long time lurker. Maybe a few posts in the past but it's been a while.
Currently trying to diagnose why I'm getting slightly wobbly lines on the ilda test. This laser had been lent out for quite sometime and I can't remember if it's always been like this or not.
My own thoughts are that it could be a dodgy ilda cable. Only have the 1 right now, ground for scanners have come loose, problem with the power supply or maybe ground on that's faulty. Maybe just kack scanners
The lasers from goldenstar model d-rgb1500. Scanners are the standard 30k ones they use.
Any advice would be much apreciated
Thanks for your time, Tristan