Results 1 to 5 of 5

Thread: Factory direct 2W-30W show lasers, custom made available

  1. #1
    Join Date
    Jul 2017
    Location
    Shenzhen, China
    Posts
    15

    Laser Warning Factory direct 2W-30W show lasers, custom made available

    Dear all laserists n laser hobbyists,

    Hello Again, it is Bill Freeman at Shenzhen Optlaser here in hope to introduce some of our products.
    I've been lurker on PL for a while, and did find some bad reviews on our name. Since the time I started working for OPT just had no idea what kind of after-sale service had my ex colleagues provided, i aware that it was really no good while some faulty products could have been replaced to satisfy our valued clients, but it just never happed at that time.
    Yet, OPT never stops searching ways to do good both on products quality as well as improvement of sale service. I myself, as the representative, have been keeping eyes on our quality and trying to lead our sale team to serve professional service whenever possible.

    We now are offering a wide range of show lasers(entry level ILDA show systems & Pro systems) and related modules.
    Please take a look about following highly recomended items, just part of the vary products we carry.

    Here we go some references:

    All systems being introduced are with safety features: Emission delay, Scanfail protection, Mechanical shutter, and aperture masking-plate.

    1). 6W Complete Laser projectors

    PD6000-RGB & PD6000-FB4Net
    Tech Specifications:
    Laser colour- Red Green Blue
    Wavelength- 638nm 520nm 445nm
    Laser power- 1800mW 1100mW 3500mW
    Divergence(full angle)- <1.2mRad <1.2mRad <1.2mRad
    Power Guarantee: 6.0W
    Beam size- ca.3mm
    Modulation- Analog >100KHz
    Scanning system- DT40K , 40kpps ILDA@8º, San angle max 60°
    Cooling- Heatsink+Casting aluminum housing+Fans (at bottom)
    Protection rate- IP54, dust-free
    Power Supply- AC100-240V,50/60Hz
    Power consumption- 120W
    Compact size- 156*224*125mm
    Net Weight- 3.75kg lightweight
    Standard Packaging- Carton+foam, Pelicase is available(on request)
    Gross Weight- 6.1kg

    Control:

    PD6000-RGB(Surprised price on request): Auto,Stand-alone, SD-card, Sound,Music, Master-slaves, DMX512, ILDA
    PD6000-FB4Net (Price $1360.00): Auto, ArtNe(In/out)t, Ethernet(In/out)
    6W burn-in, Forgive the breakpoint cause of the low pixel of phone camera. (projected at 30cm away on burn-in shelf)
    Click image for larger version. 

Name:	red.jpg 
Views:	22 
Size:	161.0 KB 
ID:	55325Click image for larger version. 

Name:	green.jpg 
Views:	6 
Size:	157.1 KB 
ID:	55326Click image for larger version. 

Name:	blue.jpg 
Views:	7 
Size:	130.1 KB 
ID:	55327Click image for larger version. 

Name:	white.jpg 
Views:	18 
Size:	167.6 KB 
ID:	55328

    Physically view of dimensions, handheld the small ones(2W-6W) and Pro ones(7W-15W).
    Click image for larger version. 

Name:	show-laser-systems-rgb-analog.jpg 
Views:	7 
Size:	84.9 KB 
ID:	55324Click image for larger version. 

Name:	5566.jpg 
Views:	7 
Size:	75.4 KB 
ID:	55330

    2). 10W/12W Complete Laser projector

    PD12000-RGB (12W guarantee price on request)

    Tech Specifications:
    Laser colour- Red Green Blue
    Wavelength- 638nm 520nm 445nm
    Laser power- 3000mW 4000mW 5000mW
    Divergence(full angle)- <1.3mRad <1.3mRad <1.3mRad
    Power Guarantee: 12.0W
    Beam size- ca.5mm
    Modulation- Analog >100KHz
    Scanning system- DT40K , 40kpps ILDA@8º, San angle max 60° (support custom Galvo kit)
    Cooling- TEC+Heatsink+Casting aluminum housing+Fans (at bottom)
    Protection rate- IP54, dust-free
    Power Supply- AC100-240V,50/60Hz, MW PSU.
    Power consumption- 120W
    Compact size- 260*250*150mm
    Net Weight- 14.75kg lightweight
    Standard Packaging- Carton+foam, Pelicase/Roadcase is available(on request)
    Gross Weight- 17kg
    Click image for larger version. 

Name:	laser-beam.jpg 
Views:	1 
Size:	65.2 KB 
ID:	55332Click image for larger version. 

Name:	laser show.jpg 
Views:	1 
Size:	68.5 KB 
ID:	55333Click image for larger version. 

Name:	beam.jpg 
Views:	4 
Size:	140.4 KB 
ID:	55331
    2x10W+2x12W BeamScan in action: https://youtu.be/0Z2CFlO-VKk

    3). 20W Complete Laser projectors(BIG THING)
    Tech Specifications:
    Laser colour- Red Green Blue
    Wavelength- 638nm 520nm 445nm
    Laser power- 5000mW 7000mW 8000mW
    Divergence(full angle)- <1.4mRad <1.4mRad <1.4mRad
    Power Guarantee: 20.0W
    Beam size- ca.6.8mm
    Modulation- Analog >100KHz
    Scanning system- DT40K , 40kpps ILDA@8º, San angle max 60° (support custom Galvo kit such as 50kpps)
    Cooling- TEC+Heatsink+Casting aluminum housing+Fans (at bottom)
    Protection rate- IP54, dust-free
    Power Supply- AC100-240V,50/60Hz, MW PSU.
    Power consumption- 120W
    Compact size- 560*315*237mm
    Net Weight- 32.75kg lightweight
    Standard Packaging- Roadcase is available(on request)

    Click image for larger version. 

Name:	20w-show-laser-system-rgb.jpg 
Views:	1 
Size:	30.5 KB 
ID:	55334Click image for larger version. 

Name:	TIM截图20190418211038.jpg 
Views:	125 
Size:	32.8 KB 
ID:	55337Click image for larger version. 

Name:	TIM截图20190418103059.jpg 
Views:	2 
Size:	71.0 KB 
ID:	55335Click image for larger version. 

Name:	TIM截图20190418103011.jpg 
Views:	1 
Size:	70.3 KB 
ID:	55336

    Due to space's limitation, I'll stop typing more for the time being. If any stuffs above are your interest, please feel free to shoot messages or emails, my realtime E: fb@optlaser.com
    People said you get what you pay, it's now you get more pay less.

    Cheers
    Bill Freeman


    Attachment 55323
    Attached Thumbnails Attached Thumbnails show-laser-systems.jpg  

    Last edited by MagicL520; 04-23-2019 at 04:02.
    With all the best,
    Bill Freeman.
    E-mail: fb@optlaser.com

    https://www.facebook.com/520Lasershow

  2. #2
    Join Date
    Dec 2007
    Location
    Denmark
    Posts
    115

    Default

    Hi Bill.
    Looks nice but i have a question for you:
    How can 1,6+1,1+2,5W = 5,2W Total and you write 6W garantied. ?


    6W Complete Laser projectors - PD6000-RGB & PD6000-FB4Net
    Laser colour- Red Green Blue
    Wavelength- 638nm 520nm 445nm
    Laser power- 1600mW 1100mW 2500mW

  3. #3
    Join Date
    Jul 2017
    Location
    Shenzhen, China
    Posts
    15

    Default

    Hey there, thanks for reminding. It was a wrong typing, just mixed up with our 5W model'power matching.
    Now got it corrected.
    6W units should be like this:
    Laser colour- Red Green Blue
    Wavelength- 638nm 520nm 445nm
    Laser power- 1800mW 1100mW 3500mW

    Quote Originally Posted by Laserpower View Post
    Hi Bill.
    Looks nice but i have a question for you:
    How can 1,6+1,1+2,5W = 5,2W Total and you write 6W garantied. ?


    6W Complete Laser projectors - PD6000-RGB & PD6000-FB4Net
    Laser colour- Red Green Blue
    Wavelength- 638nm 520nm 445nm
    Laser power- 1600mW 1100mW 2500mW
    With all the best,
    Bill Freeman.
    E-mail: fb@optlaser.com

    https://www.facebook.com/520Lasershow

  4. #4
    Join Date
    Dec 2007
    Location
    The West
    Posts
    1,285

    Default

    how are you getting 1.1 watt of 520nm green?
    is this 1 diode or 2 diodes combined?


    thank you,
    Carlos
    RGB laser projectors
    Pangolin Beyond .NET
    APC40 Midi controllers
    Pangolin FB3 controllers
    DZ splitter
    LS MegaWatt Green Machine

  5. #5
    Join Date
    Jul 2017
    Location
    Shenzhen, China
    Posts
    15

    Default

    Only one diode used. To pick out the stronger powered diode from the origin ranged 1000mw diode batch. Always existing those ones.
    Meaning that without current overdrived.

    Quote Originally Posted by carlos3621 View Post
    how are you getting 1.1 watt of 520nm green?
    is this 1 diode or 2 diodes combined?


    thank you,
    Carlos
    With all the best,
    Bill Freeman.
    E-mail: fb@optlaser.com

    https://www.facebook.com/520Lasershow

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •