Thank you guys for your valued suggestions and tricks. Now all clear why i am cuurrently having a distortion issue in the ILDA Image
as @mixedgas stated in his previously post, i double checked IDN specification. In the IDN Specificition ''For devices sampling the waveforms on the ISP-DB25 connector, the default setting SHALL be a sampling frequency of 100kHz with 100 samples per IDN channel message with the above tags and signal assignments resulting in one message per millisecond of content.''
For this specification reflesh rate must be at leat 10uS For devices sampling the waveforms. I will sort it out in the very next release and will share here the results.
Edit:
I would like to let you know that I just read (ADC Side) and write (DAC Side) X,Y,R,G and B signals. I ignore Intencity and shutter signals. Is that OK ?
Also i get in progress X / Y signals at 10 bit resolution and R,G,B at 8 bit resolution. Do i need to enhange resolutions ? Actualy When i looked into FB3 they only use 8 bit resolutions for all channels.
Finaly I am not aware that there is any at least 5 channel DAC working at 100Khz frequency. Any tips i appriciated.
Best Regards
Last edited by pyrodigy; 04-26-2019 at 03:02.
Persistance is the name of the game in this business