This video shows three first take passes using the new encoder tools.
The first take used the buttons and joysticks to lay down data for the spiral generator. An unchanging analog circle is the only image source used except for the pongloid. This take resulted in recording both the spiral generator control data to reproduce the ramp and PDM waveforms, and the waveforms themselves. Thus the external circuitry may be switched off for the remainder of the development of the piece.
The second take recorded the chopper and colormod signals, which were played on the panel. I'm still not doing anything beyond the basics with these signals, but that's coming. The beam torque effect appears late in the number.
The third take used five frames of 352 data on five buttons to add LII style choreography. Also three joystick axes were used for X, Y and offset gains which are also recorded in the data frame.
The data frame used is the 352 format with five new bits stuck into byte 16. The new bits are spiral reset2, the offset3 and offset4 bits traditionally switches on the panel, and the two joystick grouping select bits, also traditionally switches on the panel.
https://youtu.be/y14E-iMB_8g