-
AL-30K Scanner connections help Please
Attachment 56039Hı there everybody, last week we had 2 x AL30K Scanner from Golden star laser. This for local school project. ( school has very tight budget ).
When had AL-30k, unfortunately did't come with any connection diagram or manual. We email to company but did't return to us.
X - X+ G connections ?
Y - Y+ Connections and which pin ???????
Cloud you help us please, so we can pas to headmaster.
Many Many Thanks.
http://goldenstarlaser.com/index.php...product_id=253
Attachment 56038Attachment 56038
Last edited by reddevillazer; 10-25-2019 at 01:41.
Reason: My first post many mistake ı made
-
I also had problems (they didn't send me some cables, so I didn't know how to connect)
if you have all the cables it shouldn't be a problem, they only go in one direction
I hope that's what you need
-
Thank you sooooooo much, that is great help to us.
-
We didn't have to cables as well. Only cable came with power cable ( 24V supply to scanner driver board ).
-
so I was lucky, I just missed the power cable
I also had a bit of trouble contacting goldenstar, but after a few days and a few mails they finally replied, sending me these photos
-
Last photo says ( according GS laser ) RED - X White Y - but two side has red and white. This can be confuse to my local school,
Do you think my picture, correct connections.
-
I believe it refers to the input cable
unfortunately I don't know the pinout of the scanners
try contacting goldenstar by placing the order number in the subject
mimi@goldenstarlaser.com
-
Yes, my picture shows ilda input signal we belive. We contact to mimi and john but didnt come to us.
ı think we will try on monday to connect and test. let see what is going to happen.
Many Thanks for help.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules