Results 1 to 8 of 8

Thread: AL-30K Scanner connections help Please

  1. #1
    Join Date
    Feb 2018
    Posts
    7

    Default AL-30K Scanner connections help Please

    Attachment 56039Hı there everybody, last week we had 2 x AL30K Scanner from Golden star laser. This for local school project. ( school has very tight budget ).
    When had AL-30k, unfortunately did't come with any connection diagram or manual. We email to company but did't return to us.
    X - X+ G connections ?
    Y - Y+ Connections and which pin ???????
    Cloud you help us please, so we can pas to headmaster.

    Many Many Thanks.
    http://goldenstarlaser.com/index.php...product_id=253

    Attachment 56038Attachment 56038Click image for larger version. 

Name:	IMG_4061.jpeg 
Views:	0 
Size:	1.60 MB 
ID:	56040Click image for larger version. 

Name:	IMG_1901.jpeg 
Views:	1 
Size:	1.84 MB 
ID:	56041
    Last edited by reddevillazer; 10-25-2019 at 01:41. Reason: My first post many mistake ı made

  2. #2
    Join Date
    May 2015
    Location
    italy
    Posts
    21

    Default

    I also had problems (they didn't send me some cables, so I didn't know how to connect)
    if you have all the cables it shouldn't be a problem, they only go in one direction
    I hope that's what you need
    Attached Thumbnails Attached Thumbnails W$$VW%1`VF}G2(ERO2AH@L5.png  

    scanner.png  

    scanner1.png  


  3. #3
    Join Date
    Feb 2018
    Posts
    7

    Default

    Thank you sooooooo much, that is great help to us.

  4. #4
    Join Date
    Feb 2018
    Posts
    7

    Default

    We didn't have to cables as well. Only cable came with power cable ( 24V supply to scanner driver board ).

  5. #5
    Join Date
    May 2015
    Location
    italy
    Posts
    21

    Default

    so I was lucky, I just missed the power cable
    I also had a bit of trouble contacting goldenstar, but after a few days and a few mails they finally replied, sending me these photos

  6. #6
    Join Date
    Feb 2018
    Posts
    7

    Default

    Last photo says ( according GS laser ) RED - X White Y - but two side has red and white. This can be confuse to my local school,
    Do you think my picture, correct connections.
    Click image for larger version. 

Name:	scanner2.png 
Views:	19 
Size:	512.6 KB 
ID:	56047

  7. #7
    Join Date
    May 2015
    Location
    italy
    Posts
    21

    Default

    I believe it refers to the input cable
    unfortunately I don't know the pinout of the scanners

    try contacting goldenstar by placing the order number in the subject
    mimi@goldenstarlaser.com

  8. #8
    Join Date
    Feb 2018
    Posts
    7

    Default

    Yes, my picture shows ilda input signal we belive. We contact to mimi and john but didnt come to us.
    ı think we will try on monday to connect and test. let see what is going to happen.
    Many Thanks for help.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •