Yes, the variable rotation signals for Laserium came from one of the joysticks, or the Danube card originally. Then someone decided anything could be a rotation signal...
Yes, the variable rotation signals for Laserium came from one of the joysticks, or the Danube card originally. Then someone decided anything could be a rotation signal...
"There are painters who transform the sun into a yellow spot, but there are others who, with the help of their art and their intelligence, transform a yellow spot into the sun." Pablo Picasso
"There are painters who transform the sun into a yellow spot, but there are others who, with the help of their art and their intelligence, transform a yellow spot into the sun." Pablo Picasso
Steve in the circuit below - on the right side - the output of the 633s are tied to the input of the op-amps - maybe I'm missing something, but from where I'm sitting that can't be right...
Last edited by laserist; 03-22-2021 at 18:44.
"There are painters who transform the sun into a yellow spot, but there are others who, with the help of their art and their intelligence, transform a yellow spot into the sun." Pablo Picasso
I notice the IMROT uses the AD532 as does Brian's wire wrap board. I couldn't find information on using the AD633 for Z axis anywhere else. Much obliged for the provided schematic.
The continuous turn potentiometer, when connected as shown in the graphic, produces triangle waves 90 degrees out of phase rather than sinusoids. This results in the size of the image reaching a maximum when aligned with an axis, and minimum when 45 degrees off axis. If I remember correctly, this was remedied by the joysticks on the 6b having circular cutouts in the panel against which the shaft of the stick would find a limit to motion.
Have you tried grounding the north and south pins?
"There are painters who transform the sun into a yellow spot, but there are others who, with the help of their art and their intelligence, transform a yellow spot into the sun." Pablo Picasso
The AD633 is relatively new. Laser Images used AD533s early on, triming them was hit or miss since I never saw a procedure. I swapped the ones in my machine with AD532s. The AD633s look like the AD532s in a smaller footprint to me.
"There are painters who transform the sun into a yellow spot, but there are others who, with the help of their art and their intelligence, transform a yellow spot into the sun." Pablo Picasso
Grounding the north and south pins doesn't produce a noticeable difference in circuit operation, but I see why it's the right thing to do.
Photo shows the temporary improvised "card cage". Some over priced, gold loaded Vector boards arrived so I can use the connectors Brian sent a while back for a permanent build, which would be convenient should the synthesizer wish to make an appearance at such time in the future as when meetings and events can resume.
I just bought some stuff including a couple of "sin/cos" pots off of ebay. If they're not crap I'll send them if you want them...
"There are painters who transform the sun into a yellow spot, but there are others who, with the help of their art and their intelligence, transform a yellow spot into the sun." Pablo Picasso
Sure, thanks! I'll test them and post the results. Next task is reviewing your previous description of how to assemble a joystick and seeing how far I get with the parts I have.