Need a manual and cabling diagram for IPG Laser. PYL-60 with driver.

[GregR]

Need some help on an item purchased used. This is an IPG fiber laser model PYL-60 and a laser driver. This laser may be a 60 watt CW laser. I also have a used diode PLD-6-4.

It would be great to power on and test. No cables came with this laser and no manual. Any help or suggestions are greatly appreciated.

photo 1.JPG

photo 2.JPG

photo 3.JPG

photo 4.JPG

photo 5.JPG

1.JPG

2.JPG

3.JPG

5.JPG

[Power]

Did you try to contact IPG? They would be the place where you could get your questions answered.

[ramjoce]

Did you have any luck? i have this PYL-10M and a similar driver, i believe the cable is just strait... pin 1 to pin 1 and so on, i could get some info on the led display like hours, but it still can't fire the beam, i'm missing something, could find manual online, ANYONE? please?
Thank you

[javanam]

i have also a pyl-50m without puwer supply and searching manual/pinout

[javanam]

Some photos from inside..
It has 28 diodes
What is +LD1(pins 10-11) +LD2 (pins 12-13) ?
1-2-3-4 pins is GND

7-9 pins seem some control signals..

outside label write 31VDC

[Ijaz]

Some photos from inside..
It has 28 diodes
What is +LD1(pins 10-11) +LD2 (pins 12-13) ?
1-2-3-4 pins is GND

7-9 pins seem some control signals..

outside label write 31VDC

Were you able to make it work ? Any progress ?

[VDX]

... ich this is a CW- or QCW-type, then the diodes are wired in two serial banks -- I have a 130Watt CW with broken elektronics and simply connected one of the banks and could "revoke" the laser with same quality by giving power to it - didn't seem different compared to another one, I have in working condition ...

Viktor