Results 1 to 1 of 1

Thread: Millienia eV 532 nm laser's output power issue

  1. #1
    Join Date
    Apr 2021
    Posts
    2

    Default Millienia eV 532 nm laser's output power issue

    DearAll,

    In the laser research lab, we have Millennia eV 532 nm green laser from Spectra Physics.
    We use this as pumping source for Ti:sapphire fs pulsed laser.
    Recently, we had observed that output power cannot reach the value like 3.0 W and more.
    Whenever, we desire to increase power 3.1 W but it shows " CURRENT NEAR CURRENT LIMIT" it indicated 3.0 W and lower value on the screen.
    We followed the instruction manual of Millennia get SHG Autoturn to restore power, but all the time there is no response in progress bar. We repeated process several times even at maximum power of 10 W. But no success.
    Could anyone could help us to solve this problem.

    Thank you very much.
    Best regards

    Unurbileg
    Attached Thumbnails Attached Thumbnails 20210401_9.jpg  

    20210401_8.jpg  

    20210401_11.jpg  

    20210401_10.jpg  


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •