In the process of fitting everything into the existing projector , I had to bury the access to the 1/8th inch Serial connector. It is 3/16ths inch from the laser head. I'll take a piece of heatsink stock and mill it into a temporary mount for the amp. Just to contain the silver paste when it is out. I never even thought that I would ever need to access it. It's right under the top lid. Two security screws are holding it in. Unlike my analog systems where everything analog is accessible for tuning.
Demo show went off without a hitch or glitch anyways. Floor to ceiling with a 21 foot throw. Absolutely beautiful.
Only adverse comment was that I did not have enough of Jay Heck's funnier kid shows. I have a feeling "Purple People Eater" will be on the Christmas play list no matter what.
I'll bring out the TTL input ports to a set of well isolated switches for switcihiing speeds.
I have to get started on programing Graphics for "Mary did you know", probably the Kathy Mattia version, not the Zara version.
One would have never thought it, but the Cee Lo version is amazing.
The warping scrolling text running the length of the building was requested. That software feature was a jaw dropper moment.
So many new things to learn. So little time.
Fiber corrected diode gives small frame Ion like performance.
I hopped out of the car, popped open the road case, fired up Beyond and was good to go in 5 minutes. On 120 VAC.
So its Mach Dsp with a Goldenstar 5 Watt RGB in a repurposed and modified never used Able 3000 Aurora case.
Beam projectors will be two Kvant OEM Heads in dual Image Engineering graphics projectors running Analog Scannermax 506.
A 10 position ultra compact Image Engineering beam rail may just show up too. Fred Fenning was a Genius, no doubt.
Steve
Last edited by mixedgas; 11-11-2021 at 09:34.
Qui habet Christos, habet Vitam!
I should have rented the space under my name for advertising.
When I still could have...