Originally Posted by
djeric68
Guys, I don't think the ML-10s have auto mode like the Lil G Beams. G-Beams ran DMX and used dipswitch settings, and was just an 8 channel sequence on/off and maybe one or two other "patterns". NO audio either. The dip switch also let you turn on each channel static beam separately to "align" on your bounce mirrors.
ML-10:
The Big G (ML-10) had DMX plus a DB25 for 0-10v dimmer control for 10 beam actuators, 2 color flags, and a shutter. A few years ago someone on the forum needed the EPROM for the ML-10. I sent mine to them and they copied it and sent it back along with the binaries to burn more of them. I'll look for the files tonight.
I have a Lil' G beam, 5mw & 30mw RG-Beams and the board for an R-Beam and all have the erpoms in sockets. I only have the board and eprom for one R-Beam so that has to be handled carefully.
Let me find everything tonight and we can figure out a way to get them to you to make copies. I was thinking about this not too long ago, and would also like to have backups.
I'll look at the g-beams I have and see what's the latest eprom revision I have socketed. I have at least 10 g-beam boards, and at some point the eproms were changed to PROMs and were soldered, not socketed.
If anyone needs a G-Beam board, I have a bunch of populated G-Beam boards that work, some with minor issues that I will sell cheap. I also have around 50 "New" G-beam pcb's that have never been populated with components or soldered on.
I originally was using these as DMX to 8 channel TTL I/O boards, but I have built just about everything I wanted to with these.
- - - Updated - - -