Results 1 to 3 of 3

Thread: dilas + hurryscan

  1. #1
    Join Date
    Feb 2019
    Posts
    91

    Default dilas + hurryscan

    I have a galvo scanner scanlab hurryscan 10 xy2-100 1064nm
    a dilas ir diode 200w / a coherent matrix dpss 1064nm 10w and a ipg pyl-50m 50w 1064nm
    can use some of these lasers with the hurryscan scanner as engraver?
    What controllers exist for xy2-100 scanners?
    Attached Thumbnails Attached Thumbnails hurryscan.jpg  

    xy2-100.jpg  


  2. #2
    Join Date
    Oct 2012
    Location
    Germany
    Posts
    1,478

    Default

    ... the IR-laserdiode won't give a spot fine enough (but I've used one with galvo for "remote soldering").

    The dpss and fiber laser would be OK.

    I'm using E1701D from HAlaser - http://halaser.de/compare.php

    Viktor
    Aufruf zum Projekt "Müll-freie Meere" - https://reprap.org/forum/list.php?426
    Call for the project "garbage-free seas" - https://reprap.org/forum/list.php?425

  3. #3
    Join Date
    Feb 2019
    Posts
    91

    Default

    Searching for xy2-100 controller i saw opengalvo controller project
    https://youtube.com/watch?v=w4mWgVDPIiQ

    Also i have a 1064 scanner rofin basel(it is scanlab inside) SK-1012BLT that is analog
    Where can i find pinout of this and how can drive it?
    Attached Thumbnails Attached Thumbnails IMG_20221009_193537.jpg  

    IMG_20221009_193212.jpg  

    IMG_20221009_193120.jpg  

    IMG_20221009_192952.jpg  


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •