Results 1 to 2 of 2

Thread: Seattle Area - Laser Repair?

  1. #1
    Join Date
    Aug 2023
    Location
    Outside of Seattle
    Posts
    1

    Default Seattle Area - Laser Repair?

    Greetings
    Wondering if there is someone in the Seattle Area who can dial in / repair my Opt Laser PD4000A-RGB, this is just a play at home laser.

    I reached out to Opt, and they say its out of alignment and gave me instructions for aligning the diodes, but I am not confident I wonít blind myself doing it.

    I donít know enough to know if it is just out of alignment or if there is a problem with the scanner or laser module Ė the beams donít line up and mix for different colors Ė when shooting a static white circle/cone you can see they are not aligned and then at times they will move in and out of alignment, without making any adjustments or doing anything - but mostly out of alignment.

    I think it was working correctly when I first got it.

    Itís basically new, Iíve had it maybe 30 days, it has not been dropped, I donít take it anywhere. Was shipped to me from their factory in a hard case.

    I did order it without their controls and they installed the connectors so I could simple plug in and install FB4 (Which I did).

    Is there someone in the Seattle area that repairs lasers or can dial this in?

    Thank you

  2. #2
    Join Date
    Apr 2009
    Location
    Seattle, WA
    Posts
    662

    Default

    I'm here in Seattle and build lasers. I have some of those opt4watt in Costa Rica, and they are a bit of a pain to align, but I can do it. Send me a PM.

    Rick

    Quote Originally Posted by lovenwlink View Post
    Greetings
    Wondering if there is someone in the Seattle Area who can dial in / repair my Opt Laser PD4000A-RGB, this is just a play at home laser.

    I reached out to Opt, and they say its out of alignment and gave me instructions for aligning the diodes, but I am not confident I wonít blind myself doing it.

    I donít know enough to know if it is just out of alignment or if there is a problem with the scanner or laser module Ė the beams donít line up and mix for different colors Ė when shooting a static white circle/cone you can see they are not aligned and then at times they will move in and out of alignment, without making any adjustments or doing anything - but mostly out of alignment.

    I think it was working correctly when I first got it.

    Itís basically new, Iíve had it maybe 30 days, it has not been dropped, I donít take it anywhere. Was shipped to me from their factory in a hard case.

    I did order it without their controls and they installed the connectors so I could simple plug in and install FB4 (Which I did).

    Is there someone in the Seattle area that repairs lasers or can dial this in?

    Thank you

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •