Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: [SELL] ArtLaser 500mw RGB Laser

  1. Default [SELL] ArtLaser 500mw RGB Laser

    It's Eliezer from Artlaser Technology Co.,Ltd.
    http://www.artlaser.net/defaulten.asp

    Do Sales of our new Products:
    AL-P-RGB200:
    Power: 100mW (Green532nm) +350mW (Red650nm) +50mW (Blue473nm),
    Multicolor programmable laser, 25kpps High speed optical Scanner
    14 DMX Channels
    Weight: 8.0kg
    Price: US$1,900 include Software

    Any one interesting it, can contact Eliezer at eliezer@artlaser.net or send PM to me.

    thanks all !
    Attached Thumbnails Attached Thumbnails RGB200.jpg  

    RGB200-BACK.jpg  

    DSC_2270.jpg  

    =============================
    Art Laser Technology Co., Ltd
    Exports Department
    Tel:+86 755 82449798
    Website: www.artlaser.net
    Mail: export@artlaser.net
    MSN:liustar546@msn.com
    Skype:eliezer-artlaser
    =============================

  2. Default

    The Laser will include a 400 feet distance of wireless controller to switch Power mode and PC/DMX mode.
    Attached Thumbnails Attached Thumbnails 遥控器.jpg  

    =============================
    Art Laser Technology Co., Ltd
    Exports Department
    Tel:+86 755 82449798
    Website: www.artlaser.net
    Mail: export@artlaser.net
    MSN:liustar546@msn.com
    Skype:eliezer-artlaser
    =============================

  3. #3
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Question

    Does anyone know, probably not you eliezer, how hard it would be to varience this projector?
    Love, peace, and grease,

    allthat... aka: aaron@pangolin

  4. #4
    Join Date
    Jun 2007
    Location
    northern maine.
    Posts
    329

    Default

    eliezer-

    can you please tell us if this projector has an ascension number and cdrh variance for the u.s.?
    also please provide the same variance info for your 300mw rgy projector.
    is the rgy really $550 u.s.?

  5. #5
    Join Date
    Jul 2006
    Location
    Connecticut, USA
    Posts
    2,478

    Default

    by no means am i the end all, be all of variancing projectors. BUT, i have done a few. I dont think there would be too much involved with this. an interlock on the case. IR filter on the modules. (not the red obviously). and a shutter and i think this could be varianced pretty successfully. the bottom plate where everything is mounted the CDRH sometimes has a problem with if its "chincey" but with a nice solid breadboard i dont see ANY problems with certifying one of these.

    i can make a few calls if interested. again, im no variancing pro. but have a pretty good relationship with my local guy and can see what his thoughts are.
    -GLL

  6. #6
    Join Date
    Dec 2006
    Location
    Pflugerville, TX, USA
    Posts
    1,977

    Default

    Other than a projector variance, what permission do you need to do a show at a dance club?

  7. #7
    Join Date
    Jul 2006
    Location
    Connecticut, USA
    Posts
    2,478

    Default

    in the USA...

    1. projector needs to be certified (thats the ascension #)
    2. you or your company needs a variance to operate that laser projector
    3. each event that you do needs a laser light show report (although i heard that is slowly going away.)

    it can get kinda confusing but if you have specific ??'s shoot away and ill try to help.
    -GLL

  8. #8
    Join Date
    Jun 2007
    Location
    northern maine.
    Posts
    329

    Default

    i thought the ascension number for the projector is not the actual variance number for the device.
    doesn't a projector have a variance number as well?

    i know a device can have an ascension number and still not be cleared for sale in the us.
    the cdrh issues an ascension number while considering a device and then either issues a variance or the ascension number is in some way finalized as approved.

    i actually had a case where something we bought from overseas had an ascension number but was not yet certified by the cdrh for sale in the u.s.

    it may seem like splitting hairs,but don't take an ascension number as proof a device is cdrh approved,regardless of your operators variance.

  9. #9
    Join Date
    Jul 2006
    Location
    Connecticut, USA
    Posts
    2,478

    Default

    thank you for the clarification. like i said, i am in NO WAY a variance pro. although i have never tried to do a product report for an overseas projector either. so this is why my experinces with "ascension #'s" are different.

    i will try to get some proper info rather than just guesses today from my local CDRH guy.

    -GLL

  10. #10
    Join Date
    Dec 2006
    Location
    Pflugerville, TX, USA
    Posts
    1,977

    Default

    I'm mainly just curious. There is a club that I like that I wouldn't mind doing a free show or two at just for fun. But, if I have to jump through a bunch of hoops to do so then it probably isn't worth my time.

    Does anyone just do it without getting the permissions? I never would because it isn't worth the risk to me but am curious how often it happens.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •