Page 1 of 3 123 LastLast
Results 1 to 10 of 29

Thread: Lasever Power Supply

  1. #1
    Join Date
    Jul 2005
    Location
    UK
    Posts
    262

    Default Lasever Power Supply

    Morning all.

    I have me a Lasever unit with the "fancy" power supply with adjustable current.

    Now I have "misplaced" the blanking cable.

    So I need to know what "plug" is required in the socket at the back of the PSU for blanking.

    Looks like a "mini-jack" kind of thing, but didn’t look like the standard size but I may be wrong. (Probable)

    Anybody shed some light on this?

    Also is it possible to get a different / OEM PSU for it?

    As I want to build a nice small projector but having to build that think into it is a pain and I’m reluctant to bust it open and rip out the guts and attempt to make use of that that way. (In case I break it!)

    Thanks,
    Regards,

    Aidan

  2. #2
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Lightbulb

    Take a picture of what you are missing. My 150mW Lasever green only has 2 wires for blanking, a red and black. The connector on the back is for the 5 volt power adapter. The two blanking wires are just hanging there, although when I opened it they were attached to an internal 5volt connection on the power supply so it would come on when you turned it on by itself.
    Love, peace, and grease,

    allthat... aka: aaron@pangolin

  3. #3
    Join Date
    Jul 2005
    Location
    UK
    Posts
    262

    Default

    Its this model :



    Its got 2 sockets, one for the laser head and one for a small "jack" type connector.

    It came with the jack with a black / red wire on it, but I lost it!
    Regards,

    Aidan

  4. #4
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Lightbulb

    I see, much different laser. I think boomdog was having a similar issue with a laser from aixiz that looked almost exactly the same... Let me see if I can find the thread...

  5. #5
    Join Date
    Aug 2007
    Location
    Netherlands
    Posts
    417

    Default

    Well.. Take a picture of the connector on the PSU then!

  6. #6
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Lightbulb

    Quote Originally Posted by JeroenVDV View Post
    Well.. Take a picture of the connector on the PSU then!
    Heh... I was that close to saying the same thing...

    Hey, check this post, and if it is the same, then check the thread. Although another member had the cable, I think he only had one. And I think it was a lamda pro laser.

  7. #7
    Join Date
    Jul 2005
    Location
    UK
    Posts
    262

    Default

    Sorry, im at work at the min.

    Ill try and grab one later on.



    Above looks like the socket on the PSU for the head.

    Mine is the "U" model if that helps.

    Images Here
    Regards,

    Aidan

  8. #8
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Lightbulb

    I'm fairly certain they are the dame lasers, but you could PM Boomdog and ask, or PM david at Lasever. A blanking cable should be easy to get ahold of.

  9. #9
    Join Date
    Jul 2005
    Location
    UK
    Posts
    262

    Default

    Is his address david *at* lasever.com?

    As ill shoot him an email and see if he can send one out or something.

    Thanks,
    Regards,

    Aidan

  10. #10
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Lightbulb

    Quote Originally Posted by Aidan View Post
    Is his address david *at* lasever.com?

    As ill shoot him an email and see if he can send one out or something.

    Thanks,
    Um... I'm not sure, he is a member here, goes by "lasever". His email may be in his profile. I have it on my aol account but that is not cooperating at this moment.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •