Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: Need to pay off my new toy...

  1. #1
    Join Date
    Jun 2005
    Location
    SoCal
    Posts
    508

    Default Need to pay off my new toy...

    So thing's have been busy and hectic at the "farm"... we have a new
    tool to pay off so I'm taking ideas for pricing and sizes for optical
    beam tables... I'm hoping to make a few runs of high quality low cost tables.



    The basic considerations we have to take into account which temper
    ultra low costs are the size (or more accurately the weight of the table
    since metal is sold by the lbs), the cycle time (number of holes) and the
    cost of tooling (taps, drills, etc)... aside from that, please post what sizes
    you guys need, what you think it's worth and what your "buy-it-now" price
    is... It doesn't matter if you don't have an immediate need, I'm just
    seeing what the common requested sizes are so I can start tooling...

  2. #2
    Join Date
    Jan 2007
    Location
    Cupertino, California
    Posts
    2,130

    Default

    How about the weight of the starting material plus $ per minute of work time? The price per minute should vary biased on how fast your CNC works. Is it a 3Axis or 5 axis? That seems to be a good price. Also, what kind of CAD files can you take? Would you be able to do parts in shapes other then just plates? In my experiance, at least on a manual mill, it is much easier to make parts lime blocks and brackets then it is to make precision plates.
    CLICKY!!!

    Admin: In the immortal words of Captain Planet: YOU HAVE THE POWER
    Admin: (To quit being a bitch)

  3. #3
    Join Date
    Jun 2005
    Location
    SoCal
    Posts
    508

    Default

    Well the new CNC is nice and fast

    Does 800+ inch/min rapids and 400 inch/min cuts... 10HP (15HP peak)
    says it'll cut though most anything... It's a standard box-ways CNC mill
    so it has a bit of get-up-and-go...

    It's pre-wired with a 4th axis, but I'm choosing plates to keep the costs
    down and that should only use 3 axis... We plan on standard 1" O.C.
    w/ 1/4-20 tapped holes...

    We could do odd sizes and complex cuts but that'd have to be ironed
    out individually because I can't imagine people having a "standard"
    non-rectangular shape they want...

    We use 5/8" plate on our gear unless the table is <1'x1', 1/4" plates are
    very cheap, but tend to flex... we can do any thickness, but the
    material is measured by the pound... with precision plates being a bit
    more expensive... I wouldn't go under 1/4" and 1" plate is really nice
    but very heavy...

    I figure we can do two or three classes of material, the cheapest being
    extrusions, followed by MIC6 plates and the most expensive being
    precision ground plates (though I can't see too much demand for the
    latter unless you're doing lab work)

    Right now we just buy our stock new at Industrial Metal Supply, and
    I plan on running these jobs during the night to get some little extra
    cash to pay this beast off sooner...

    The max size of table is 5'x3' to fit without creepy workholding,
    though if we can keep it 4'x2' or smaller that'd be nice... Again, the killer
    on big tables is the raw weight of metal... You're not going to be
    able to lift a 5'x3' table without help.

  4. #4
    Join Date
    Jan 2006
    Location
    Charleston, SC
    Posts
    2,147,489,446

    Cool Re: CNC milled optical plates...

    Interesting toy you have there, Yadda!

    I don't know how many people here would be interested in a 5 ft table, but I'll wager that there are plenty of folks that would be interested in 2 ft by 12 inch or 2 ft by 18 inch tables...

    Then again, a lot of us recently purchased surplus optical plates like these on E-bay. Evidently the seller has a whole crapload of these things and puts groups of 25 of so on E-bay from time to time. His price is pretty hard to beat, though I will admit that his plates are not tapped, and the holes are not drilled on 1 inch centers, but rather on 5/8 inch centers. Nevertheless, I used one in my RGB rig, and so far it's worked out very well for me.

    Can you give us a rough idea of what it would cost for a 2 ft by 1 ft table, say, 3/8 of an inch thick, drilled and tapped on 1 inch centers to 1/4-20? And how much extra if we bump it up to 1/2 inch plate? (Aluminum, of course... Steel is too heavy.)

    Adam

  5. #5
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Question

    How bout a whole enclosuer?
    Last edited by allthatwhichis; 09-23-2007 at 04:42.
    Love, peace, and grease,

    allthat... aka: aaron@pangolin

  6. #6
    Join Date
    Apr 2005
    Location
    SOUTHAMPTON U.K.
    Posts
    1,357

    Default

    Also, most Europeans would require the holes tapped for M5.

    How about MM1's, dichro holders and brackets etc.

  7. #7
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Talking

    How much for the bikes? and not that beach cruiser!

  8. #8
    Join Date
    Jan 2007
    Location
    Cupertino, California
    Posts
    2,130

    Default

    Quote Originally Posted by QUAZAR View Post
    Also, most Europeans would require the holes tapped for M5.

    How about MM1's, dichro holders and brackets etc.
    If anyone would like to loan me a mm1, I can make a CAM file of it so he cam mass produce them. The problem is that you cannot just cut them out of plate, you have to start as a block. This is because if you cut out a piece with the mill, it will then get the cutter cought between the loose piece and the work piece. Depending on the hardness/thickness of the material and cutter, it will either destroy one face of the loose piece, break the cutter, or both. All of which result in a total disaster. If you want to cut pieces like that out of plate stock, you have to leave a few little tabs holding it in place. Or use a jig to hold down the loose piece with a bolt.
    CLICKY!!!

    Admin: In the immortal words of Captain Planet: YOU HAVE THE POWER
    Admin: (To quit being a bitch)

  9. #9
    Join Date
    Jul 2005
    Location
    Flying over a town near you
    Posts
    1,404

    Default

    Just use a slitting saw on a horizontal milling head. Purchase surface ground bar stock from Dillsburg aviation. Just cut to desired length..then cnc drill set up on another mill with a turret head...or build a holding fixture......no big twig either way. I wouldn't waste time with the mm-1's........unless they are a small run of special function other than commercially available size/special use. Time vs. materials costs would have to be somewhat far less than the buy it now from whoever's catalogue. Time is a major factor in manufacturing arenas now. Everyone looks for an outsourcing venue to avoid high labor costs and materials acquisition. Plus EO has them for $35 brand new.
    Last edited by MechEng3; 09-23-2007 at 09:03.
    You are the only one that can make your dreams come true....and the only one that can stop them...A.M. Dietrich

  10. #10
    Join Date
    Jan 2006
    Location
    S.E. Florida
    Posts
    483

    Default

    Quote Originally Posted by MechEng3 View Post
    Just use a slitting saw on a horizontal milling head. Purchase surface ground bar stock from Dillsburg aviation. Just cut to desired length..then cnc drill set up on another mill with a turret head...or build a holding fixture......no big twig either way. I wouldn't waste time with the mm-1's........unless they are a small run of special function other than commercially available size/special use. Time vs. materials costs would have to be somewhat far less than the buy it now from whoever's catalogue. Time is a major factor in manufacturing arenas now. Everyone looks for an outsourcing venue to avoid high labor costs and materials acquisition. Plus EO has them for $35 brand new.

    Your right it is cheaper to buy them. I have a small CNC mill as well and thought about making MM1`s and dichro mounts to sell cheap to the members here. I should have done my home work, after I figured out the cost of material and my time I could not beat the prices they sell for now unless I made a run of 1,000 or so.
    "Gravity its not just a good idea its the law"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •