Anybody got one? I dont need a psu, just a bare module like an aixiz or something.
Anybody got one? I dont need a psu, just a bare module like an aixiz or something.
Damn! I got only 650nm modules (unused)
Pangolin FB3 QS/LivePro/SMS2Laser
Riya MultiBus
Pangolin LD2000 Pro
I need a red-orange fix bad. I was even thinking about spending $100 for a he-ne psu but my he-ne's only 7 mw need a lil more...
How much for your 650 and what power? (just curious)
It is an 100mw 650nm
Pangolin FB3 QS/LivePro/SMS2Laser
Riya MultiBus
Pangolin LD2000 Pro
Here is the spec:
wavelength 650nm
cw output power 100mw
Operating Modulation TTL Blanking Effect
beam diameter less than 2.5mm
beam divergence less than 1.5 mrad
warm-up time less than 10min
operating temperature 10-40 degree
storage temperature -10-60 degree
beam height from base 9mm
dimensions of laser head 35x18mm (LD)
dimensions of power supply 90x50x23mm (LWH)
Power supply 110V-220V AC
Life over 5000hours
Picture:
Asking for 90usd incl shipping to US. Add 10usd for insuranse and tracking no (optional)
Last edited by cruch; 09-29-2007 at 08:31.
Pangolin FB3 QS/LivePro/SMS2Laser
Riya MultiBus
Pangolin LD2000 Pro
Well, I can get you a 45mW Spectra Physics 125A HeNe, but the shipping cost would be way too much. It weighs about 100 pounds and is almost 6 feet long.
CLICKY!!!
Admin: In the immortal words of Captain Planet: YOU HAVE THE POWER
Admin: (To quit being a bitch)
Thanks Y'all , I'm still gonna look for a 635. (under 6 ft long )
Heh, on eBay, lasershowparts has a 100mW CNI for $792 and a 150mW Lasever for $792... I wonder how their outputs compare... Look like on eBay they go from 10mW to 100mW with nothing in between... There are a couple of 30mWish henes...
Last edited by allthatwhichis; 09-29-2007 at 18:36.
Love, peace, and grease,
allthat... aka: aaron@pangolin
That ought to be worth some money to the right buyer... Even if shipping is expensive, those huge HeNe's aren't all that common these days.
Sure would make a great mix with a hot multiline 60X for an all-gas whitelight projector, assuming you had a PCAOM to use with it. (I'm thinking back to the one that Have-Locked (Jeff) had at SELEM...)
Adam
KVANT Australian projector sales
https://www.facebook.com/kvantaus/
Lasershowparts- Laser Parts at great prices
https://www.facebook.com/lasershowparts/