Your BluRay auction link says: "Max Current : ~110mA(recommand)" which, I think gives you closer to 100mw of 405nm. Given that, something like this should work (if you're looking for something approaching white):
100mw 405
25mw 532
100mw 660 or 60mw 650
Personally, I think 660 is a much nicer color than 650.
Don't forget to heat sink your diodes.
Originally Posted by
jimbo12d
Im new to laser projectors, but I have made an lcd projector. Im looking to spend about $300 on all parts.
$50 150mW violet from
ebay
$50 200mW green from
dx
and what mW red would be recommended
dichros from ebay maybe
$20 dx dac
$40 I think I need
this too: laserboy correction amp
$140 20k scanners from ebay
Questions:
How to do blanking with these lasers since they dont have that built in. Id like to do analog blanking so I have more color possibilities.
Do I need any other parts?
Will these 20k scanners be able to do some graphics?
Is there a cheaper method than this that actually produces
I have a crappy 50mW green from amazon, but I dont think it is barely 20mW. If I used this would it look really dim once it is scanning?
suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.