Heres are some pictures of my *ahem* workspace....
First is my office/workshop in the house - with almost complete laser projector amidst the rubble - this bench is supposed to be for work work as I have another smaller area for my electronics workbench.
second is looking towrds the back of the garage with my tools, lathe, fridge for beer , the exciter for the sp168 and the beast itself sitting atop a shelf above the bench. This shelf was constructed so the Sp168 can stay out most of the time and using my fear of dropping it on the deck to guide me the shelf has six solid legs down to the bench top and straps holding it firmly to the wall behind.
third the view towards the front of the garage with my pull down projection screen. note the power feeds on the wall in the corner - to the left is a rotary isolaton switch with 10mm SWA cable comming up to it this is the feed in from the house soley for the SP168 to the right of this is the 6mm feed that powers everything else One good thing with doing it this way is if the laser goes off on one and trips the RCD breaker in the house then the lights dont go out - or at least I can switch them back on!
Now Graham has suggested this maybe this is where I should post my projector build pics. Maybe we could have a branch from photon emiters area where we create a new tread for each persons build details. this could make it easier to navigate.
Rob