Results 1 to 3 of 3

Thread: DIY Optics Mounts

  1. #1
    Join Date
    Dec 2006
    Location
    Pflugerville, TX, USA
    Posts
    1,977

    Default DIY Optics Mounts

    I didn't read through all of this but it looked interesting and might be useful:

    http://www.src.wisc.edu/users/SRC_Te...03/SRC-203.pdf

  2. #2
    Join Date
    Jan 2007
    Location
    Cupertino, California
    Posts
    2,130

    Default

    Someone had posted this a while back, they are very usefull. But the downside is that it costs a lot to make them and unless you have a CNC, it takes a good bit of time to mill them out.
    CLICKY!!!

    Admin: In the immortal words of Captain Planet: YOU HAVE THE POWER
    Admin: (To quit being a bitch)

  3. #3
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    9,890

    Default

    Quote Originally Posted by Laser Ben View Post
    Someone had posted this a while back, they are very usefull. But the downside is that it costs a lot to make them and unless you have a CNC, it takes a good bit of time to mill them out.
    Yeah, I posted it. The guy who designed them retired, and its hard to get actual drawings from them. They give you a picture, rought sketches and and some dims, so it still takes a fair bit of engineering to make them work. Pluys some of the parts numbers he quotes are obsolete. nice deigns, but beware. The flexure stuff is correct, according to our master machinest at work.
    Steve Roberts

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •