mixed group buy for SCANPRO20,30,and 40s ?

[clandestiny]

I use 6800's for graphics- beams usually 24k mix and match- lots of 120's because i have lots with good mirrors- I guess I have been looking at these for graphics - but was always concerned about the mirrors-

I dont believe the cambridge mirrors are a direct swap for any of the chinese units- yet
hence my reluctance to jump in-

[dream beamz]

yes, 8 watts of argon has been put on the 10ks many many times. they handle it just fine, as always with high power, make sure everything is clean before firing it or you will imprint that dust into the mirror.

[clandestiny]

8 watts you say- I was thinking along the lines of 25w

[buffo]

I was thinking along the lines of 25w

SHOWOFF!

Adam

[dave]

8 watts you say- I was thinking along the lines of 25w

Well, if its 25w of 532nm, you are in luck, otherwise you are limited to 5-8w

[dave]

The offer is still on,

anyone interested?

[flecom]

i am definately interested, i was the one emailing you about buying a red, green and blue along with some ScanPro 40's... but things have been getting pretty bad around here $$$ wise so i keep having to scale back...

i might not be able to do the lasers for a few months but i definately want to do the scanners so i can at least use the lasers ive got

i wouldent mind being your US "distribution center" either if you still need somone to distribute them...