Page 1 of 11 12345 ... LastLast
Results 1 to 10 of 104

Thread: Laser-wave to CNI Compare Test

  1. #1
    Join Date
    May 2007
    Location
    Austria/Vienna
    Posts
    260

    Default Laser-wave to CNI Compare Test

    Hello Guys,
    First, I must say thanks for the trust of bridge. Iīm really amazed about the good service what Laser-wave do.
    How ever, some heard about it :
    I do an Compare Test with the green lasers : CNI 400mW and Laserwave 412mW. Who will die first? Who hast the best stability? etcetc...
    I begun the test 1 week ago (on 27.December),- Pics come after Iīm healthy. At the moment Iīm on bed with 39° ague, but will open the thread with the laptop.
    So what was the think in one week? Nothing!
    No lasers lostt pointly power, the lasers runs nice... They run and run and run
    What I must really say: I like the laserwave modules more than CNI...
    The stability at blanked work is nice, donīt lost so much power than CNI , has better beamdata... so I like it
    I will make all 1 week a new answer where I will tell you the news.
    thanks,
    Phil

  2. #2
    Join Date
    May 2007
    Location
    Austria/Vienna
    Posts
    260

    Default

    Hello!
    Now the second Week is away.
    This is result upon now:
    The green Laser-wave do 410mW constant!
    And the CNI do 380mW
    So now I can say : Laserwave IS better!
    Here a pic how I let it run.

    Next week I will make an Testpic for you, where you will see the blanking and linearitiy of the two lasers.
    fG

    Phil

  3. #3
    Join Date
    May 2007
    Location
    Austria/Vienna
    Posts
    260

    Default

    Hello!
    I must say next test result.
    The lasers have run now 672hours.
    The CNI is gone to exact 352mW, and the Laserwave only lost 15mW! So it has 395mW exactly...
    Iīm really wait on the 1000Hours point!
    http://img91.imageshack.us/my.php?image=img0017jt2.jpg
    http://img242.imageshack.us/my.php?image=img0020gd4.jpg

    What I wanna say. at the time I get this laser I testet the blanking of it, I think the result will be interesting for you!
    I testet the laser at 28Kpps @ K35+ on 40° angle and let the show run.
    The Laserwave has 320mW @ analogue, and 342mW@ TTL blank while the work.
    I havenīt messured the CNI, but the CNI lost much more power on analogue blanking ( I think will go over to ~250mW )
    I will test the CNIs next days, now I will go to bed, is 3:13am here :-))

    - Phil
    Last edited by Phritzler; 01-23-2008 at 17:18.

  4. #4
    Join Date
    May 2007
    Location
    Milwaukee WI
    Posts
    1,355

    Default

    Looking good Phil!

  5. #5
    Join Date
    May 2007
    Location
    Austria/Vienna
    Posts
    260

    Default

    Hello!
    Some news: The laser runs and runs and runs :-)
    No laser has lost power or something, so we will wait :-)
    fG
    Phillip

  6. #6
    Join Date
    Dec 2006
    Location
    Netherlands
    Posts
    964

    Default

    Hi Philip, cool that you are doing this test! It might take a while though LOL.

    Question: where did you get the copper dichro mounts?

    cheers,
    Z/.

  7. #7
    Join Date
    Nov 2005
    Location
    Melbourne, Australia
    Posts
    3,693

    Default

    They look like Arctos mounts to me
    KVANT Australian projector sales
    https://www.facebook.com/kvantaus/

    Lasershowparts- Laser Parts at great prices
    https://www.facebook.com/lasershowparts/

  8. #8
    Join Date
    Jan 2007
    Location
    Peking
    Posts
    1,199

    Default

    hello, Phill
    another weekend had gone, how things going on?
    I am sure all of us are like to know more.except the long life test.
    power, power stability, beam, divergence, TTL, analog etc with all lots of pictures.
    thanks again for your kindly hlep, Phill.
    Best regards!
    Bridge

  9. #9
    Join Date
    May 2007
    Location
    Austria/Vienna
    Posts
    260

    Default

    Hello!
    The laser run on their power, havenīt lost anything!
    Whatīs the power I said you, the stability I canīt say, but the beam is the same Diameter and divergence.
    Thanks,
    Phil

  10. #10
    Join Date
    Feb 2008
    Location
    NEW ENGLAND
    Posts
    7

    Default

    good stuff

    shoulda throw in LASEVER too for comparison



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •