Results 1 to 6 of 6

Thread: 2 scanset and 1 usb/ilda

  1. #1
    Join Date
    Jan 2008
    Posts
    13

    Default 2 scanset and 1 usb/ilda

    Hi
    I have question:

    I have 2 scanset,and 1 usb ilda interface.

    I thik:
    I need 2 specular image
    Is possible link 2 scanset from 1 ilda cable???
    For result specular image i have invert X cable....you have idea for invert cable of x??I invert siply 1 and 13 pin of ilda for second specular scanset??

    thanks
    Matteo

  2. #2
    Join Date
    Jan 2005
    Location
    Norway
    Posts
    1,302

    Default

    You got 2 scanners ?
    And one DAC ?


    You can instert one ILDA cable to the first scanner, and then use the output to the next scanner..

    If not just split the ILDA cable and use it to both scanners..

    I think there should be no problem there ?


    what does the experts say ?

  3. #3
    Join Date
    Dec 2006
    Location
    Scotland
    Posts
    1,407

    Default

    I amnot sure , as the first post was quite hard to understand , but when i build a projector i always put two 25 connectors on back and merge the wiring internally with connector blocks , one male and one female .

    Connect the dac to one and run a standard 25 pin cable same as dac cable to next projector , wihich has two connectors as well !! i have daisy chained 4 projectors this was before , utilising , maybe 20 / 30 metres of cables in total.

    However it was only used for beams , an it worked fine , i seem to remember there was some "sizing" problem on images on 2 of the projectors , didnt troubleshoot though as was an issue for me playing with beams as the time. Also ll the projectors were single colour 532nm , might get seiosuly more complicated if it ws colour ?

    However daisychaining was good fun , enjoyed the effect !

    PAUL
    In the beginning there was none. Then came the light - #1 UKLEM - 2007
    BUY UK LEGAL LASER POINTER :: NEW - Blue 460nm Laser Pointers

  4. #4
    Join Date
    Jan 2005
    Location
    Norway
    Posts
    1,302

    Default

    I have connected 4 Lasers from one DAC !
    Works full Colour with no problem..

    But I dont know how many sets of galvo you can link from only one DAC!

  5. #5
    Join Date
    Jan 2008
    Posts
    13

    Default

    ok...i link 2 scanset on 1 dac...

    For result specular image???
    Exampli: Scanset run cube figure and run whit left...Scanset2 run cube figure and run whit right...
    I need invert X position....whit software no possible..are possible invert ilda pin of scanset2 for X position (pin 1 + and 13-)???

    thanks...
    Matteo

  6. #6
    Join Date
    Aug 2007
    Location
    Ukraine
    Posts
    128

    Default

    Yes, when you will exchange wires 1 and 13, you will have inversion on X in your scanner...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •