i see, you will have to explain all this to me at the meet.The way I have fixed this problem may not be the quickest or indeed the best, there is probably an easier/faster way within each zone. But I haven't tested that and wouldn't want to give you a guessed answer.
There is a projector settings tab in each zone to set scanrate etc. Then there is an option in the bottom of the zone window to adjust other scanner settings and I believe there is an option there to tell that zone to ignore the overall projector settings. That may sort it out, but as I say I haven't yet tested that option, plus I'm working from memory here
The way I do it is: Right click the cue and select 'Edit Image Properties' from here you can adjust the scanrate of that specific cue. Also other parameters in there that you can adjust like colour and zone.
least im not the only one who thought this and im glad you know what im talking about.
cos all beams shows you want at 100% size but you want the scan rate down to 15K and for animations you want small angle and 30k scan rate