Hi
For a while I have been having problems with my cr laser super 1. its as if one of the galvos stick in the wrong position. sometimes the y galvo will project into the laser, other times it projects, just onto the floor!!!
At fist I thought it was the loom, between the galvo and the driver boards, but I have since replaced it. Normally it happens after the sound guy tests his large subs, but tonight the ilda test pattern caused it.
After a little mucking around it corrects itself (tonight I shifted the image up and down to rectify it)
Any Ideas? as it is laser number 4 in six months, 2 have had this problem!!!!
Thanks
Martyn