Results 1 to 6 of 6

Thread: Wanted - DMX to Analog converter board

  1. #1
    Join Date
    Aug 2007
    Location
    Under a rock in Cambridge UK
    Posts
    1,353

    Default Wanted - DMX to Analog converter board

    Hi,

    I am looking to buy a new or used Dmx to Analog converter board to control my Poly 20 Diffraction wheel.

    The analog voltage needs to be controllable from 0 to 5v maximum.

    Any help would be greatly appreciated.

    Mark


  2. #2
    Join Date
    Jul 2005
    Location
    Lancashire UK
    Posts
    1,372

    Default

    Hi Mark

    Have you seen the DMX control board on the Medialas web site

    it has 18 channels 16 are ttl for beam table grating control and 2 channels are analogue ....

    no idea of price .... but an email to dirk will give you that info

    http://www.medialas.de/data/DeMax16-2.pdf

    all the best .... Karl

  3. #3
    Join Date
    Jan 2008
    Location
    Stockholm, Sweden
    Posts
    799

    Default

    According to their Nov 2007 pricelist it's 159 excluding VAT. Might have changed since then, but it should give you an idea about the price.

  4. #4
    Join Date
    Jul 2007
    Location
    Knoxville, TN & Huntsville, AL, USA
    Posts
    3,108

    Default

    I'm not sure if these guys will ship overseas or not, but if so, the favorable $$ exchange rate (for you guys, at least!!) might make it worth while!

    http://home.att.net/~northlightsystems/home.htm
    RR

    Metrologic HeNe 3.3mw Modulated laser, 2 Radio Shack motors, and a broken mirror.
    1979.
    Sweet.....

  5. #5
    Join Date
    Aug 2007
    Location
    Under a rock in Cambridge UK
    Posts
    1,353

    Default

    Thanks for the replies...

    Karl, I contacted Medialas and both Dirk and Elena said it wouldn't work. Which I couldn't understand, as it appears to be exactly what James at Laser Visuals specified. Which board do you use?

    Maplin used to make one, but they don't do them any more.

    Think I will try your place Stuka, these things seem to be rare as rocking horse sh, yeah well you get what I mean

    Cheers
    Mark

  6. #6
    Join Date
    Jul 2007
    Location
    Knoxville, TN & Huntsville, AL, USA
    Posts
    3,108

    Default

    Hope it works out for you - when I ordered from them, I got VERY quick service, so hopefully your o'seas locale won't cause too much of a delay.

    They have a very well designed web site, as well - plenty of info posted about their products, with downloadable (PDF) manuals available for several of their DMX boards. For those new to DMX (like me!), their manuals are also a good "beginner's guide" to proper DMX connections.

    Randy
    RR

    Metrologic HeNe 3.3mw Modulated laser, 2 Radio Shack motors, and a broken mirror.
    1979.
    Sweet.....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •