Hi Guys
Although I've already posted a couple of threads on PL I i'm new hear and would like to say Hello to you all.
I've been playing with lasers for about 12 years starting with a HeNe with 3 motor scanners. Then moved on to Argon and then started using DPSS lasers about 6 years ago. (What a difference to the electric bill it made).
At the moment I am using a AT Laser Athene 1 DMX system 100mW Green with modification to output to a second projector I built my self. (I am told that you lot love looking at photos of other peoples systems so i'll post some ASAP).
I am gearing up to start upgrading my system with 2 new CNI MGL150 laser heads, 2 new sets of Scanpro 20 scanners from Lasershow Parts and A new Cham Tech PM25 controller desk.
I've already PMed Banthia (Karl) about an up coming problem with the signal output of the PM25 to the scanner amps input. would love to get some more info from anyone else who may be able to help me.
The PM25 desk outputs the image signals at +/- 10v (20v P to P). This is the case for all the pins X+, X-,Y+ and Y- and as most of you will know the input signal to the scanners is set for +/- 5v (10v P to P).
George at Cham Tech who is supplying me the PM25 as told me to just turn down the Gain pot on the Amps. will this be ok or can anyone sergest a better idea.
Hope some of you can help me and i'm realy jelose of some of systems you lot have got to play with.
Regards
Carl