Results 1 to 5 of 5

Thread: EasyLase enclosure??

  1. #1
    Join Date
    Dec 2006
    Location
    Pflugerville, TX, USA
    Posts
    1,977

    Default EasyLase enclosure??

    Has anyone made an EasyLasy enclosure? I have one and it has the DMX attachment. I'd like to put it in a box and would like to hear from other EasyLase owners before I reinvent the wheel.

  2. #2

    Default

    Hi,

    I used a Hammond box - 1598BBK
    (looks like the box the non OEM version of Easylase used to come in)
    http://uk.farnell.com/jsp/search/pro...jsp?SKU=722583
    Should be available in the USA from Newark + others....
    This is a 2 part plastic case with aluminium end panels.
    The Easylase user manual gives a template for cutting the USB, Power & ILDA holes.
    Just print, trace, chain drill then file....
    You would have to put the DMX connector somewhere on the back panel.

    The 25W socket holds the board well at one end.
    The other end I used two 10mm long threaded pillars - already screwed to the PCB then surrounded at their base with epoxy once the board was fitted to the front panel and the front panel seated in the slot in the bottom half of the case.

    Regards,
    Robin
    Lasers and beer don't mix. After 2 beers I lose coherence.

  3. #3
    Join Date
    Dec 2006
    Location
    Pflugerville, TX, USA
    Posts
    1,977

    Default

    Thanks. That looks like it will work pretty well. I'll need to double check that the DMX portion will fit and then order it.

  4. #4

    Default

    Some pics - I think the DMX bit should fit in the back there.....
    Attached Thumbnails Attached Thumbnails EasyL1.jpg  

    EasyL2.jpg  

    EasyL3.jpg  

    Lasers and beer don't mix. After 2 beers I lose coherence.

  5. #5
    Join Date
    Dec 2006
    Location
    Pflugerville, TX, USA
    Posts
    1,977

    Default

    Oh yea, I can tell from the pic that there is plenty of room. That looks perfect. Thanks!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •