Results 1 to 4 of 4

Thread: Scanpro20 Jumper's

  1. #1
    Join Date
    Feb 2005
    Posts
    1,131

    Default Scanpro20 Jumper's

    what are the 2 sets of jumpers for?
    right next to the signal inputs on the driver board

  2. #2
    Join Date
    Dec 2007
    Posts
    93

    Default

    They invert the axis. you have to turn both of them 90 degrees. It's not in the manual, but it is in the scanpro30 manual.

    so if these "=" are the jumpers, turn them 90 like so
    = to ||

  3. #3
    Join Date
    Feb 2005
    Posts
    1,131

    Default

    OK
    One of the jumpers was missing,,
    screwed everything up!

  4. #4
    Join Date
    Feb 2005
    Posts
    1,131

    Default

    Quote Originally Posted by highvolt View Post
    They invert the axis. you have to turn both of them 90 degrees. It's not in the manual, but it is in the scanpro30 manual.

    so if these "=" are the jumpers, turn them 90 like so
    = to ||


    Thank you!

    great advice

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •