-
I know its a little old now but as Jimbo asked I should probably reply.
I got 3 DB25 jumper boxes and made up one with 1+14 switched (X inverted) one with 2+15 switched (Y inverted) and one with both switched (X+Y inverted) I can then use whichever one is appropriate to the situation and it was cheaper than building a multiway DB25 switch box (About £10)
EDit:
Ok, that didn't work, although that was the advice given in my thread on the same subject...
http://www.photonlexicon.com/forums/...ghlight=invert
AS far as i can make out, the FB3 connector is wired:
X sig to 1
X grnd to 14
Y sig to 2
Y grnd to 15
Edit:
Solution now realised, prompted by Jimbo! *thanks*
Look here for the opamp diagram
http://www.photonlexicon.com/forums/...3434#post63434
Last edited by norty303; 10-08-2008 at 10:11.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules