Results 1 to 6 of 6

Thread: PSU for neos

  1. #1
    Join Date
    Jun 2008
    Location
    Estonia
    Posts
    245

    Question PSU for neos

    Evening All!
    First post after a while lurking, great forum!, so hello to all.
    Seem to bown the PSU for my NEOS. Fuse is ok, so was wondering if anyone had any ideas. Haven't fiddled under the cover yet, cos' I dont know what to look for! So:

    Whats likley to have died.
    Can I replace it myself.
    Can someone else fix it for me and how much.
    Should I buy a new PSU, if so where and how much.

    Thanxs in advance

    Lex

  2. #2
    Join Date
    Jun 2008
    Location
    Estonia
    Posts
    245

    Default

    Hello again
    Couldn't find the "this thread is useless without pics" pic thing, but it is. Forgot to add that the PSU is made by Power Solutions Inc with serial no. 9808-51199bf and here's a piccy:



    Thanxs

    Lex

  3. #3
    Join Date
    Jan 2007
    Location
    Peking
    Posts
    1,207

    Default

    Hi Lex,
    Welcome join, nice forums.
    ok, I don't know what happen to you PSU, but look like there are only AC to DC power supply is broken, so you can see it on the power supply what output voltage it is ? what output current it is? then buy the same voltage(be sure the same output voltage, that is very important) and the same or higher current power supply just replace the broken one is ok.
    wish you good lucky.
    Best regards!
    Bridge
    P.s: I am sorry don't know why I can't attachments the pictures.
    Laser-wave can supply:
    Green 532nm, 4W, 10W, 15W
    blue 445nm, 2W, 3.5W, 6W, 10W
    blue 462nm, 2W
    Red 638nm, 500mW, 1W,2W, 4W, 5W, 6W, 8W, 10W
    All diodes, All optics, All mount, All laser base and housing for yourselves building lasers.
    Speical products, 532nm, OEM-V-SS, 4W, 98mm*46mm*48mm; OEM-H, 10W, 250mm*88mm*70mm
    www.laser-wave.com or www.laser-wave.net
    bridge@laser-wave.com or 463366312@qq.com
    We Chat: 463366312, Laserwave-Bridge

  4. #4
    Join Date
    Jun 2008
    Location
    Estonia
    Posts
    245

    Default

    Hi Bridge!
    Thanxs for the welcome! Yeah, checked out power inc today and found UK sub, so have sent details and await their responce. If i have no luck there will try main company in the U sof A.

    Cheers
    Lex

  5. #5
    Join Date
    Jul 2005
    Location
    Lancashire UK
    Posts
    1,379

    Default

    Lex ...

    welcome buddy to PL


    Sadly that PSU looks like one of the worst Built switching PSUs i have ever seen ( metal work wise ) so i guess that the electronics is the same standard .... you can see that the output wiring termination is all burnt... pretty shoddy

    the neos needs a good smooth supply ... maybe worth investing in a good analogue supply with lots of big Caps .... or a top quality switching supply

    im hoping it has not caused any damage to the neos


    all the best .... Karl

  6. #6
    Join Date
    Jun 2008
    Location
    Estonia
    Posts
    245

    Default

    Hi Karl
    Yeah, maybe post some of the other little goodies that came with it when i get the chance. There is a lable on the bottom of the unit saying made in mexico! Honest!!
    What would you recomend as a replacement?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •