Lasever 300mw 635nm module

[allthatwhichis]

How bout using two telescopes? one to shrink a little and one to straighten divergence out afterward...

[carmangary]

It's hard to aim a moving beam through a telescope.

[allthatwhichis]

It's hard to aim a moving beam through a telescope.

Before the scanners... There has got to be a way to shrink a beam from 5mm to 3mm and keep the same divergence, given enough optics... I guess a two step approach, shrink, then straighten.

[FrankenPC]

I have the same issue with my 635nm laser. I'm thinking about passing it through a folding prism to simulate a longer pathway to the dichroic mirror.

[andy_con]

oh good so im not the only one then!!

i spent 6 hours yesterday putting in my new mirror mounts.

i need to do some more tweaking tonight see if i can get a few more mw of red through the optics

[FrankenPC]

Before the scanners... There has got to be a way to shrink a beam from 5mm to 3mm and keep the same divergence, given enough optics... I guess a two step approach, shrink, then straighten.

Someone has to have a collimator for this type of problem. Problem is finding it.

[andy_con]

???

7 hours later and my mirrors mounts are in and ive just done some tweaking to get a few more mw's from my red

[Dr Laser]

Someone has to have a collimator for this type of problem. Problem is finding it.

They have been looking into this problem for last 90 years. Still no answer

[Pitts]

Man if that red beam in the pix was a dork it would be a porn star !!

Not sure how many guys got the email but HB lasers Germany have a sale on right now..

They are selling various reds one that caught my eye was the 7-800mw 640nm I think it said.. for about $1750.00 Euros with 3mm beam.. 1mrad div
Anyone had any experience with any of the HB laser units ??..
Seems a good beam spec for the money..

Cheers

Ray
NZ

[Dr Laser]

Man if that red beam in the pix was a dork it would be a porn star !!

Not sure how many guys got the email but HB lasers Germany have a sale on right now..

They are selling various reds one that caught my eye was the 7-800mw 640nm I think it said.. for about $1750.00 Euros with 3mm beam.. 1mrad div
Anyone had any experience with any of the HB laser units ??..
Seems a good beam spec for the money..

Cheers

Ray
NZ

650nm...and you have to divide it by 4...So 800/4=200mw.... You can get 200mw 635 with a good beam spec. Problem starts when you try to get above 200mw. In case of 650mw above 800mw.