Is doable this RGB set?

[buffo]

I hate redoing a precision drilling layout. But, oh well.

Don't think of it as a re-drilling... Think of it as an unplanned weight-reduction plan for your optical table!

Adam

[FrankenPC]

Don't think of it as a re-drilling... Think of it as an unplanned weight-reduction plan for your optical table!

Adam

Talk about the glass half full! It's annoying, but my overall jig weight will be lighter. Yes, there is an upside

-Roger

[bridge]

Hi Steve,
Pleasure to see your orginal RGB projector.
look like your projector had more blue power, from the combine color you know what power blue I choose for you. . Mate.
Best regards!
Bridge

Hi all!
I tried this layout, changin positions of laser heads as Rob adviced me.
There isn't alignment yet, of course...
Is it fine?
(sorry for ugly quality of pics...)
Greets!

Steve

[Steve Milani]

Hi all!
Some pics about my new "baby"...
It is still "under construction", of course..... by the way.... I am working 18 hours in a day... I am little bit tired....

Some info:
- breadboard is aluminium 1 cm, dimensions are: PSU level = 40 x 40 cm, Laser heads level = 40 x 30.
- It will be n°4 fan ( n°2 each level): 1 for onboard air flow and 1 for outboard air flow. They run at mains 220V power.
- Laser head (analogue) power (form Bridge): blue=around 250 mw, red= more than 200 mw, red=next to 300 mw.
- galvoscan 20K (by LaserWave)
- ILDA software: Laserworld "Showeditor 2008" with n°2 USB box (DAC).

I am enough satisfied about the "white" colour quality, but I well know I can do better...

Well.... Now I have to go.... Works must go on!!!
See you soon Mates, whit more pics also!!!
Greets!

"Uncle" Steve

[FrankenPC]

Hi all!
Some pics about my new "baby"...
It is still "under construction", of course..... by the way.... I am working 18 hours in a day... I am little bit tired....

Some info:
- breadboard is aluminium 1 cm, dimensions are: PSU level = 40 x 40 cm, Laser heads level = 40 x 30.
- It will be n°4 fan ( n°2 each level): 1 for onboard air flow and 1 for outboard air flow. They run at mains 220V power.
- Laser head (analogue) power (form Bridge): blue=around 250 mw, red= more than 200 mw, red=next to 300 mw.
- galvoscan 20K (by LaserWave)
- ILDA software: Laserworld "Showeditor 2008" with n°2 USB box (DAC).

I am enough satisfied about the "white" colour quality, but I well know I can do better...

Well.... Now I have to go.... Works must go on!!!
See you soon Mates, whit more pics also!!!
Greets!

"Uncle" Steve

I'm physically drooling. My analog blue laser is stuck in customs. It's...killing me inside...

[James Lehman]

Solid!

James.

[Steve Milani]

Hi all!
As I promised I'm going to post some new pics coming from my first RGB test (please excuse me for low quality of photos).

Info:
- RGB about 750 mw analogue laser 20kpps (last born...) from Laser-Wave (Thanks to Bridge!) is always that one in the centre.
- on left side looking at pics: PRO 400 RGY 45kpps from laserworld (not analogue).
- on right side looking at pics: RS 800 RGY 50 kpps fromLaserworld (not analogue).
- Software used: "Showeditor 2008" by Laserworld (sorry if in some pics you can see the monitor light on...).

Enjoy all!
"Uncle" Steve

[allthatwhichis]

Nice pics man! Looks like you are almost ready to do some parties for money.

[Steve Milani]

Nice pics man! Looks like you are almost ready to do some parties for money.

Thanks Mate...

You said right...
Parties=lasershows=earn little money=other new laser approach it to me.....

Greets

[Steve Milani]

Hi guys!
More pics from my garage...
Five lasers all together working! The sixth (an old He-Ne gas laser, 75mw guaranteed @632,8 nm is sleeping into my studio room...).
Two of them (first and last looking from left) are working like "chorus", setted on "auto" mode.
Three lasers on the centre are running by ILDA.

Maybe next wednesday I should play a lesershow on the riverfront.
I hope to succeed to take some pics of event.

All the best

(Marc... you can take all pics you like)

Greets!

"Uncle" Steve